Manual

36 37
TROUBLESHOOTING
Port Conflict
Another active application may conflict with
the serial ports you have selected on the
Setup – Devices – Ports page.
If this is the case, the following screen will
appear.
There are two options to resolve this
problem:
1 ConnecttheDB2toanotherphysicalCOM
port and select this COM port on the COM
port page.
2 Close the conflicting application.
TECHNICAL SPECIFICATIONS
Digital Inputs and Outputs
Connectors
Formats
Output Dither
Word Clock Input
Sample Rates
Processing Delay
Additional Delay
Frequency Response DIO
Processing Resolution
Sample Rate Conversion
Type
Dynamic Range
THD+N
Input Rate Range
Analog Inputs
Connectors
Impedance
Max. Input Level
MinInputLevel(for0dBFS)
A to D Conversion
A to D Delay
Dynamic Range
THD
Frequency Response
Crosstalk
Analog Outputs
Connectors
By-pass
Impedance
Max. Output Level
Full Scale Output Range
D to A Conversion
D to A Delay
Dynamic Range
THD
Frequency Response
Crosstalk
EMC
Complies With
Safety
Certified To
Environment
Operating Temperature
Storage Temperature
Humidity
PCMCIA Interface
Connector
Standards
Card Format
Control Interface
RS232
GPI, Pedal, Fader
General
Dimensions (W x H x D)
Weight
Finish
BackupBatteryLife
Mains Voltage
Power Consumption
Warranty Parts and labor
BNC(AES3-id,75ohm),RCAPhono(S/PDIF)
AES3-id(24bit),S/PDIF(24bit),EIAJCP-340,IEC958
HPF TPDF dither 8 to 24 bit
BNC,75ohm,0.6to10Vpp
32 kHz, 44.1 kHz, 48 kHz
0.5ms@48kHz
0 to 1000 ms, 24 bit at all sample rates
DCto23.9kHz±0.01dB@48kHz
48 bit fixed point
Asynchronous
120dB
-106dB44.1to48kHz@1kHz,-2dBFS
31 kHz to 49 kHz
XLR balanced (pin 2 hot)
20 kOhm (balanced)
+28dBu(balanced)
4dBu(balanced)
24 bit (1 bit, 128 times oversampling)
0.8ms@48kHz
>103dB(unweighted),>106dB(A)
-95dB(0.0018%)@1kHz,-6dBFS(FS@+18dBu)
10Hzto20kHz:+0/-0.2dB
<-80dB,10Hzto20kHz,typical–100dB@1kHz
XLR balanced (pin 2 hot)
Through relay
40 Ohm (balanced)
+26dBu(balanced)
-4dButo+26dBu(balanced)
24 bit (1 bit, 128 times oversampling)
0.57ms@48kHz
>100dB(unweighted),>104dB(A)
-86dB(0.005%)@1kHz,-6dBFS(FS@+18dBu)
10Hzto20kHz:+0/-0.5dB
<-60dB,10Hzto20kHz,typical–90dB@1kHz
EN55103-1andEN55103-2,FCCpart15ClassB,
CISPR22ClassB
IEC 60065, EN 60065, UL60065 and CSA E60065, CSA
FILE# 186633
32° F to 122° F (0° C to 50° C)
-22° F to 167° F (-30° C to 70° C)
Max.90%non-condensing
PC Card, 68 pin type 1 cards
PCMCIA2.0,JEIDA4.0
Supportsupto2MBSRAM
9PinSUB-D(RS232toUSBcableincludedinbox)
¼ inch phone jack
19” x 1.75” x 8.2” (483 x 44 x 208 mm)
5.2 lb. (2.35 kg)
Anodized aluminum face. Plated and painted steel chassis
development
> 10 years
100to240VAC,50to60Hz–(auto-select)
< 20 W
1 year
Due to continuous development these specifications are subject to change without notice.