Manual

a
IMPORTANT SAFETY INSTRUCTIONS
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install
in accordance with the manufacturer’s instruc-
tions.
8 Do not install near heat sources such as
radiators, heat registers, stoves, or other
apparatus (including amplifiers) that produce
heat.
9 Do not defeat the safety purpose of the
polarized or grounding-type plug. A
polarized plug has two blades with one
wider than the other. A grounding type plug
has two blades and a third grounding prong.
The wide blade or the third prong are provided
for your safety. If the provided plug does not
fit into your outlet, consult an electrician for
replacement of the obsolete outlet.
10 Protect the power cord from being walked
on or pinched particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
11 Only use attachments/accessories specified
by the manufacturer.
12 Use only with the cart, stand, tripod,
bracket, or table specified by the
manufacturer, or sold with the
apparatus. When a cart is used, use
caution when moving the cart/apparatus com-
bination to avoid injury from tip-over.
13 Unplug this apparatus during lightning storms
or when unused for long periods of time.
14 Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as power-supply cord or plug is
damaged, liquid has been spilled or objects
have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or has
been dropped.
• Thisequipmentshouldbeinstallednearthe
socket outlet, and disconnection of the device
should be easily accessible.
• TocompletelydisconnectfromACmains,
disconnect the power supply cord from the AC
receptacle.
• Themainsplugofthepowersupplyshall
remain readily operable.
• Donotinstallinaconfinedspace.
• Donotopentheunit–riskofelectricshock
inside!
Caution:
You are cautioned that any change or modi-
fications not expressively approved in this
manual could void your authority to operate this
equipment.
Service
• Therearenouser-serviceablepartsinside.
• Allservicemustbeperformedbyqualified
personnel.
Warning!
• Toreducetheriskoffireorelectricalshock,
do not expose this equipment to dripping or
splashing and ensure that no objects filled
with liquids, such as vases, are placed on the
equipment.
• Thisapparatusmustbeearthed.
• Useathreewiregroundingtypelinecord
like the one supplied with the product.
• Beadvisedthatdifferentoperatingvoltages
require the use of different types of line
cord and attachment plugs.
• Checkthevoltageinyourareaandusethe
correct type. See table below:
Voltage Line plug according to standard
110 to 125 V UL817 and CSA C22.2 no 42.
220 to 230 V CEE 7 page VII, SR section
107-2-D1/IEC 83 page C4.
240V BS1363of1984.
Specification for 13A fused plugs
and switched and unswitched
socket outlets.
The lightning flash with an arrowhead
symbol within an equilateral triangle is
intended to alert the user to the presence
of uninsulated “dangerous voltage” within
the product’s enclosure that may be of sufficient
magnitude to constitute a risk of electric shock to
persons.
The exclamation point within an equilat-
eral triangle is intended to alert the user
to the presence of important operating
and maintenance (servicing) instructions
in the literature accompanying the product.