Manual

17
BASICS – PRESET HANDLING
To delete a preset:
• SelecttheDeletepagebyclickingthe
DELETE side tab.
• Selectthepresetyouwishtodelete.
• ClickDELETE.
When Presets are stored or deleted, param-
eters on the In/Out page and Engine Layers are
always affected.
System parameters, on the other hand, are
unaffected by any other commands than a
specific System Store or System Delete.
16
PRESET STRUCTURE – RECALL/STORE/DELETE
Library Pages
On these pages, all preset operations are
handled.
To recall a preset:
• Simplyselectthedesiredpresetbyclicking
on the preset name in the list.
• ThenclicktheRECALLbutton.
System Presets:
There are three System User memory locations
and one Factory Default. None of them is
affected by regular Recall operations.
System User memory 1 is always recalled
when powering up the unit.
System presets include:
Analog Trim, Meters, Dither, Remote and
Bypasssettings.
System parameters are described later in this
manual.
Engine Presets
Engine presets hold all parameters and settings
from the Engine page.
User Presets
The User banks U1 to U8 can hold up to eight
presets each.
Factory Presets
DB2comesloadedfromthefactorywitha
collection of general purpose factory presets,
organized in banks F1 to F8.
Store – Delete
To store a preset:
• SelecttheStorepagebyclickingtheSTORE
side tab.
• Selectapresetlocation.
• ClickSTORE.
Recall buttonPreset List
Bank Handling
Via the Library Bank page, you can:
• BackupandretrievetheSystemUserbank.
• Backupandretrieveanyuserbank(U1to
U8) to any user bank location (U1 to U8) or
to your hard disk.
From Bank
OnthispageyouselectwhichbankontheDB2
you wish to copy from.
From File
If you have already stored banks on your
computer, this is where the files will appear.
To Bank
SelectwhichDB2bankyouwishtocopythe
selected bank to.
To File
Select “To File” if you wish to backup the
selected bank to your hard disk.
The TC Icon saves the bank files in a
specific location. This location varies
slightly between different operating
systems.
As an example, Windows 2000 saves backup
files in Application Data\TC Electronic\TC Icon\
DB2Presets\xxxxx
Do not move the files from this location, or the
TC Icon will not be able to display the presets
on the “From File” page.