Quick Guide

ManualsBrandsTC Electronic ManualsAudio accessoriesD-Two

ENGLISH - GERMAN - SPANISH - ITALIAN - FRENCH - JAPANESE

For complete manuals in German, Spanish, Italian and French please download from our website at:

www.tcelectronic.com

D•TWO

MULTITAP RHYTHM DELAY

TC ELECTRONIC

QUICK GUIDE TO THE

Summary of content (4 pages)

PAGE 1
QUICK GUIDE TO THE D•TWO MULTITAP RHYTHM DELAY by TC ELECTRONIC ENGLISH - GERMAN - SPANISH - ITALIAN - FRENCH - JAPANESE For complete manuals in German, Spanish, Italian and French please download from our website at: www.tcelectronic.
PAGE 2
QUICK GUIDE POWER button Power on/off. IN LEVEL knob Adjusts the Input level. MIX knob Adjusts the global mix between dry and wet signal. Fully clockwise position is 100% effect. IN meters The IN peak meter shows the Input level of left and right channels. The meter range is: 0, -3, -6 ,-12, -18, -24, -40dB. OVERLOAD LEDS The OVERLOAD LEDs indicate one of two situations: - The Input level is too hot and therefore overloading. - There is an internal DSP overflow.
PAGE 3
QUICK GUIDE DELAY/TAP key This key has two functions. - When the DELAY key LED is lit, the DELAY wheel changes the Delay time when dialed. - When the key is tapped the D•TWO measures the time between the last two taps and the Delay time is calculated according to the selected subdivision. FEEDBACK/RHYTHM key This key has three functions. - When the LED is lit the DELAY wheel is changing the Feedback level or %. - When the key is pressed and held, the DELAY wheel changes the number of repeats.
PAGE 4
QUICK GUIDE Setting up the D•TWO Connect the D•TWO as illustrated using balanced 1/4” jack cables. Mode selection The D•TWO has two operating modes: Regular and Rhythm. Regular mode The D•TWO default mode and what you use for standard delay applications. Rhythm mode A unique feature allowing you to tap a specific rhythm of your choice. The D•TWO automatically enters the Rhythm mode when FEEDBACK/RHYTHM is tapped.