User Manual

9 HALL OF FAME 2 X4 REVERB User Manual
5.3 Expression Pedal Setup
Connecting an expression pedal allows continuous control of decay, tone, or
reverb level. You will be able to dene which parameters are controlled with the
pedal, as well as the range of control. For example, if controlling the delay level
with a pedal, you may not want the “heel down” position to turn the delay level
all the way o, and you may not want the “toe down” position to actually reach
maximum output level achievable with the Level knob.
It’s important to note that the Flashback 2 X4 does not work with standard
250 kΩ guitar volume pedals. You will need a 25 kΩ linear pot expression pedal
for proper function.
Follow these steps to assign one or more parameters to an expression pedal:
• Connect an expression pedal to the EXP PEDAL input.
• Connect your pedal to a computer or smartphone/tablet via USB cable.
• Open the TonePrint app.
• Navigate to the Product Settings tab and click the 'Calibrate expression
pedal' button.
• Follow the instructions for calibration. When the heel and toe positions have
been established, click 'Done'.
• Navigate to the Expression Pedal tab to assign parameters that will be
controlled with the expression pedal. The pedal response curve is indicated
in a graphic display, and a peg will move along the curve as the pedal is
rocked back and forth.