User Manual

ManualsBrandsTC Electronic ManualsGuitar EffectsHall of Fame 2 x4 Reverb - FOOT REVERB EFFECT WITH 4 FOOTSWITCH MASH AND 6 TONEPRINT SLOTS

11 HALL OF FAME 2 X4 REVERB User Manual

8. MIDI

The HALL OF FAME 2 X4 is equipped with MIDI IN and THRU jacks, allowing an

external MIDI controller to control preset and parameter changes.

The following charts detail the control and program changes accepted by

HALL OF FAME 2 X4. Note that the MIDI receive channel is 5.

Initiating a program change will load the associated preset and un-bypass the

pedal. To bypass the currently-selected preset, either use program change 1

(all FX o) or use the bypass command (cc 12) if you need to toggle the same

preset on/o.

Preset Changes

* Note that depending how the MIDI controller handles program change messages (0-127 or 1-128),

the program number may need to be 1 digit higher than what is listed in the chart.

Parameter Control

* CC 0-63: FX On, CC 64-128: FX Off. If used after preset selection, triggering FX On will retain current settings and

not reload preset.

Note that the modiers (knobs) can control up to 3 user-selectable

parameters, so MIDI control may aect more than just the parameters listed.

Custom controller setups can be arranged via the TonePrint app, and each

TonePrint slot can store unique modier congurations.

9. Links

Support resources

• TC Electronic Support: tcelectronic.com/support/

• TC Electronic – product software: tcelectronic.com/support/software/

• TC Electronic – all product manuals: tcelectronic.com/support/manuals/

• TC Electronic user forum: forum.tcelectronic.com/

TC Electronic on...

• the Web: tcelectronic.com/

• Facebook: facebook.com/tcelectronic

• Google Plus: plus.google.com/+tcelectronic/

• Twitter: twitter.com/tcelectronic

• YouTube: youtube.com/user/tcelectronic

Preset number Program change

Bypass All 1

Preset A / Bank 1 2

Preset B / Bank 1 3

Preset C / Bank 1 4

Preset D / Bank 1 5

Preset A / Bank 2 6

Preset B / Bank 2 7

Preset C / Bank 2 8

Preset D / Bank 2 9

Parameter name / destination Control change

Decay (modier 3) 1

Pre Delay (modier 4) 2

Tone (modier 1) 3

Level (modier 2) 4

MASH switch (active FX engine) 5

Exp Pedal (jack must be unplugged) 11

Bypass (active FX engine) 12*