Operation Manual

BP Smart Battery Charger User Manual V1.1
7.3 Installation Guide
1. It is not a water proof type. Please locate a position of which water is not accessible.
2. Please cutting the hole as per size offered by following Pic A: 122mm X 76mm
3. Connect cable to remote controller and battery charger.
4. Put the dip switch on correct position on the battery charger:
Switch 5 Switch 6 Switch 7 Switch 8
ON ON OFF OFF
5. Please use screw (M4) to fix the remote controller onto dashboard, please refer to pic B.
PIC A:
PIC B:
TBB Power Co. Ltd. 20