Operation Manual

BP Smart Battery Charger User Manual V1.1
c) Output Power: Setting the output power of the battery charger
d) RST: Reset R/C to the original setting.
* How to change the output power:
1) Press Enter to switch the page until it shows " OUTPUT POWER xxx%"
2) Press the "Output Power" button for several seconds until the percentage on the screen is
freshing.
3) Press the "Set" button to choose your setting for the output power. (5 options are available:
20%, 40%, 60%, 80% and 100%. The default setting is 100%)
3.Message explanation:
POWER
SUPPLY
Battery charger power
supply function.
CURRENT
20.0A
VOLTAGE
14.4V
Shows output
voltage and
current at power
supply function.
CURRENT
00.0A
Shows the current
output amps
OUTPUT
POWER
The output
power setting
FLOODED
14.4V
Shows the battery type
Setting and the present
charging voltage.
CHARGED
OVER TEMP
Charger over
temp.
STAGE
CONST
CURRENT
Shows the present
charging stage
BATTERY
OVER TEMP
Battery over
temp
BATTERY
TEMP
25°C
Shows the battery
temperature
BATTERY
OVER VOLT
Battery over
voltage.
CYCLES 0000
Shows the charged
cycles.
The value will be
accumulated until it is
reset manually
BATTERY
LOW VOLT
Battery low
voltage
CHARGED
TIME
00000H00M
Shows the charged
time since the battery
charger is power on
REVERSE
POLARITY
Reverse polarity
error.
CHARGED
000000 AH
Shows the charged
amps hour since the
battery charger is power
on
TBB Power Co. Ltd. 19