Use and Care Manual

15
Vibrations.
Check to assure that the cooler is level.
Make sure the bottles don’t touch each
others.
The cooler is not leveled
The bottles are vibrating.
There is an object under the cooler.
Remove the object.
The door will not close
properly
The cooler
The cooler seems to
make too much noise.
is not level.
Level the cooler.
The rattling noise may come from the
flow of the refrigerant, which is normal.
As each cycle ends, you may hear
gurgling sounds caused by the flow of
refrigerant in your
cooler.
Contraction
and expansion of the inside walls may
cause popping and crackling noises.
.
The cooler is not level.
The door was reversed and not properly
installed.
The gasket is dirty.
The shelves are out of position.
Error Code:
E1
E
Level the cooler.
Close the door properly.
Clean the door gasket.
Place the shelves properly.
2
Temperature sensor disconnect.
Temperature sensor failure.
Contact us for a service call.