Use and Care Manual

12
Cleaning your beverage cooler
Turn off the power, unplug the appliance, and remove all items including shelves. Wash the inside surfaces with a
warm water and baking soda solution. The solution should be about 2 tablespoons of baking soda to 1 cup of
water.
Wash the shelves with a mild detergent solution. Wring excess water out of the sponge or cloth when cleaning
area of the controls, or any electrical parts.
Wash the outside cabinet with warm water and mild liquid detergent. Rinse well and wipe dry with a cl
ean soft
cloth. Do not use steel wool or steel brush on the stainless steel. These will contaminate the stainless steel with
steel particles and rusting may occur.
Power failure
Most power failures are corrected within a few hours and should not affect the temperature of your appliance if
you minimize the number of times the door is opened. If the power is going to be off for a longer period of time,
you need to take the proper steps to protect your contents.
For easy access t o t h e st or ag e con t en t , you can pu ll t h e sh elf ap prox im at ely 3 0 % ou t of t he
rail com p ar t m en t , how ev er t his u n it w as design ed w it h a st opper on each sid e of t h e sh elf
t o pr ev en t b ot t les fr om f alling
Shelves
The appliance is equipped with three wired shelves. You can remove the shelf by lift up and pull smoothly.
To prevent damaging the door gasket, make sure to have the door all the way opened when
shelf out of the rail compartment.
.
it out
pulling the
t r ack
bottom