User's Manual

31
Models 345, 346, 349, 355 Operating Procedures
Step 10
With the pail beneath the door spout, open the draw
valve and relieve all pressure from the freezing
cylinder. Remove the hopper cover. Slowly pour the
two gallons (7.6 liters) of sanitizing solution into the mix
hopper until the hopper becomes 1/4 full of sanitizing
solution.
Figure 38
Step 11
With the brushes provided, brush-clean the mix
hopper, mix inlet hole, mix level float switch, product
fitting, CO
2
fitting and mix feed tube. Use caution when
cleaning the float switch so as not to damage it.
Figure 39
Figure 40
Figure 41
Figure 42