User's Manual

Model BC12 Operating Procedures

091020

Pulse Switch Operation

Make sure your hands are clean and sanitized

before performing these steps.

Step 1

Place the power switch in the ON position.

Figure 17

Step 2

Hold the cup under the agitator and lift up, so the

agitator touches the bottom of the cup.

Figure 18

Step 3

Press the pulse switch to start the agitator.

Figure 19

Step 4

With a swirling motion, gradually move the cup up

and down over the spinning agitator and completely

around all sides of the cup. Swirl the cup around the

agitator to produce a pleasing product appearance

and to avoid leaving a hole in the center of the

mixture.

Figure 20

Step 5

Before removing t he cup, allow excess mixture to be

thrown off the agitator and be caught by the cup or

lid/collar.