User's Manual

10
Model BC12Important: To the Operator
Program Dial
The program dial allows the operator to select a
number of pre-programmed settings. The machine
will shut off automatically at the end of the program.
Figure 7
Reset Switch
The reset switch is located above the power switch
on the front panel. The reset switch protects the
motor from an overload condition. If an overload
occurs, the reset mechanism will trip. To properly
reset the unit, wait a short period of time to allow the
motor to cool. Press the reset switch and resume
operation.
Figure 8
Splash Guard
The splash guard catches product thrown from the
agitator and shields the operator during mixing.
Figure 9