by Chopper & Blender Prep System Instruction Manual Item # AC-1200-BL 120V ~ 60Hz 260W
Thank you for your purchase of The Biggest Loser™ Chopper & Blender Prep System. Please READ this instruction manual carefully before use. SAVE THESE INSTRUCTIONS TABLE OF CONTENTS Important Safeguards . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Special Instructions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4 Descriptive Diagram . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
IMPORTANT SAFEGUARDS When using electrical appliances, basic safety precautions should always be followed, including the following: 1. READ ALL INSTRUCTIONS COMPLETELY BEFORE USING. 2. To protect against electrical shock do not immerse or rinse cord, plugs or this appliance in water or any other liquid. 3. Close supervision is necessary when any appliance is used by or near children. 4. Unplug from outlet when not in use, before putting on or taking off parts and before cleaning. 5.
SPECIAL INSTRUCTIONS This appliance is for HOUSEHOLD USE ONLY. • This appliance has a polarized plug (one blade is wider than the other). To reduce the risk of electrical shock, this plug will fit in a polarized outlet only one way. If the plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. Do not modify the plug in any way. • Make sure the voltage in your outlet is the same as the voltage indicated on the appliance.
DESCRIPTIVE DIAGRAM Measuring Cup Blender Cover Chopper Cover Blender Container Chopper Blade Chopper Bowl 2 Speed Button 5
USING YOUR CHOPPER & BLENDER PREP SYSTEM BEFORE FIRST USE • Make sure the voltage in your outlet is the same as the voltage indicated on the appliance. This product is for 120 –Volt AC electrical outlet only. • The chopper bowl is equipped with a safety locking system to increase security during operation. The chopper function will not work if the chopper bowl, blades and cover are not properly locked in place. • Remove any bags, labels or stickers from the appliance.
HOW TO USE YOUR BLENDER • • • • • • • • • • Place the unit on a flat, sturdy surface with adequate clearance (i.e., do not place under wall cabinets or on carpeting or other soft surfaces). This appliance is not for use in convection, or conventional ovens, microwaves, or on stovetop. Make sure the appliance is switched off and unplugged. Wash and dry all components thoroughly as stated above. Assemble with blender components. Always be sure that the appliance is properly assembled before using.
TIPS FOR PROCESSING FOOD AND SELECTING THE RIGHT OPERATION CONTROL Chopper Blade for chopping and grinding CHOPPING: Make sure that the bowl, blade and cover are in proper position. The “LO” and “HI” pulse buttons are designated for chopping, pureeing and mixing food. Use this function also for soft foods such as herbs, celery, onions, garlic, sauces and in preparation of salad dressings. Normally, 2 or 3 pulses are enough for chopping.
IMPORTANT OPERATION INFORMATION • • • • • Stability during processing: Due to the high power of the unit, it is recommended to use one hand to hold the unit while running. Make sure the cover is securely in place and keep hands away from blades and moving parts. Maximum operating time: Never use the appliance continuously for more than 1 minute at a time. OVERTIME OPERATION PROTECTION – a timer is built into the Chopper & Blender Prep System.
CHOPPING GUIDE 10
TROUBLESHOOTING The Chopper & Blender Prep System will not operate. • Has a household fuse blown, or has a circuit breaker tripped? • Is the power supply cord properly seated in the unit and the outlet? • Is the inter-locking bowl and lid secured properly? • Has the cord been damaged in some way? If so, DO NOT USE THE APPLIANCE. Contact Customer Service for replacement information. • Has the auto-shut off feature activated? The Chopper & Blender Prep System is vibrating.
WARRANTY Taylor® warrants this product to be free from defects in material or workmanship for one (1) year for the original purchaser from date of retail purchase. It does not cover damages or wear resulting from accident, misuse, abuse, commercial use, or unauthorized adjustment and/or repair. If service is required, do not return to retailer. Should this product require service (or replacement at our option), please contact Taylor Customer Service at 1-800-289-0944.
