Use and Care Manual

NOTE: Your rice cooker will remain in the WARM

function until it is manually turned off. For best results, the

automatic keep-warm cycle should be left on no longer

than 5 hours at a time. To stop the automatic keep-warm

cycle, you must unplug the appliance.

IMPORTANT: If you would like to begin another cook

cycle after your cook mode is completed, you must

ensure that the heat sensor on the inside of the base

is clean, dry and cool. Beginning a cook cycle with a

cool heat sensor will ensure your rice cooker will cook

properly. If you wish to cool the heat sensor down

quickly, remove the rice bowl from the unit and leave

the lid open. Allow the unit to cool down while you

are preparing the food or rice for your next cook cycle.

The cool-down process may take up to 30 minutes to

complete.

NOTE: Follow the cleaning instructions, located on

page 10, after each use.

USING THE STEAMER BASKET

1. Measure water into rice bowl. Place foods to be steamed into the steamer basket; place

basket in the rice bowl.

2. Place rice bowl with basket into base; place lid on rice bowl.

3. Plug cord into a 120V 60 Hz AC only outlet.

4. Push lever down to start cooking. Cook according to times indicated in recipes.