Use and Care Manual

7
USING YOUR RICE COOKER
CAUTION: When opening, always open lid away from
face, to avoid steam burns.
Handle the rice bowl carefully. Scratching or denting the bowl might cause unsatisfactory
performance.
Before using, be sure that the outside of the rice bowl is clean and dry. Be sure that the heat sensor
in the center on the inside of the unit is clean, dry and cool.
MAKING RICE
It is advised that you carefully rinse your rice before cooking.
Do not rinse flavoured or enriched rice or if the package clearly
states not to rinse. Rinse under cold running water in a strainer
until the water runs clear. Do not rinse rice in rice bowl, as you
may damage the non-stick coating. To measure rice using the
included markings in the rice bowl (see fig.1), follow directions
below.
USING THE INCLUDED SCOOP:
Measure the desired quantity of rice with the included
measuring scoop. Rinse the rice in cold water, if required,
and put into the rice bowl. Add cold water, filling to the
corresponding marking under
on the inside of the rice bowl.
For example: if you are using 6 scoops of rice, add enough
water to reach the “6” mark in the rice bowl under
.
NOTE: These markings correspond
to the included measuring scoop, not
to standard measuring cup amounts.
2
4
6
8
0.4
0.8
1.2
1.5
2
4
6
8
0.4
0.8
1.2
1.5
2
4
6
8
0.4
0.8
1.2
1.5
2
4
6
8
0.4
0.8
1.2
1.5
fig.1
fig.2