Tus neeg siv phau ntawv
9EN
Turning “ON” the tracker
1. Take the tracker outside so that it has the sky view.
2. Slide the power button towards “ON” indicator, the blue led will turn on and/or the
blue with green led will start ashing.
3. Put the tracker down and wait for 15 minutes. The tracker will carry out initial GPS
positioning. This is required for the device to operate correctly. The tracker will then
be ready for use and can be activated.
NOTE: this procedure is only required the very rst time the tracker is turned “ON”.
Activating the tracker
1. Open your internet browser and go to the following website: www.trackilive.com
2. Select your language.
3. Click on “Activate Tracker” and follow the instructions on the screen.
Start tracking:
You can directly start tracking from our online tracking platform by visiting www.track-
ilive.com, or download our mobile application by searching “Trackilive” in Apple’s app
store or Google’s play store for free of charge.
LED Indicator Denition
Green Indicator: LTE “Flash“: LTE communications start; „Continuously in bright status“:
no LTE signal; „o“: power o or in sleep mode
Blue Indicator: GPS “Flash“: GPS location successful; „Continuously in bright status“:
GPS signal searching; „o“: power o or in sleep mode
Red Indicator: Power charge: „Continuously in bright status“: charging; „o“: power o
or full charged
NOTE: When the equipment in power saving sleep mode, the light will turn o after
about 10 minutes without any operation.