Operation Manual

30
Connectivity: PC / SCART Setting
With the power on, in VGA mode.
1. Press PC/HD of source buttons to select VGA mode.
2. Press MENU.
3. Press W or X to select “Connectivity”.
4. Press T to highlight “PC”, and then press OK to enter the
Sub-menu.
5. Press S or T to highlight one item. Press OK.
6. Press W or X to make adjustments, then press OK.
7. Press MENU to return to the Main menu, or press EXIT to exit
the menu.
Connectivity:
PC: The item of PC in the main menu of Connectivity only appears in VGA mode.
Auto image
:
Automatically adjusts picture. You may follow steps 1-4, and then highlight
“Auto image” Æ press OK.
H Position : Adjusts the horizontal position of the picture.
V Position : Adjusts the vertical position of the picture.
Phase : Adjusts the picture phase.
Clock : Adjusts the width of the picture.
Sub-menu
Return : Return to the main menu.
Main menu (in VGA mode) Sub menu (in VGA mode)