Operation Manual

23
English Français Italiano
Deutsch
Español
Nederlands
V32MCAK E01-01EN 11/13/2007_ver.A-PD.paula
Picture Setting
You may need to perform separate adjustments for brightness and contrast for the
different modes.
With the power on, in any mode
.
1. Press Source button to choose desired source.
2. Press MENU.
3. Press W or X to select “Video” and press T.
4. Press S or T to highlight one item. Press OK to enter the
Sub-menu.
5. Press W or X to make adjustments in the adjustment bar and press OK.
6. Press MENU to return to the main menu, or press EXIT to exit the menu.
Video:
Backlight : Adjust the backlight level of the screen.
Contrast : Increase and decrease the picture contrast.
Brightness : Darken and brighten the picture brightness.
Colour : Deepen and lighten the picture colours.
Sharpness : Adjust the outline of pictures to make them more sharper or duller.
Tint* : For skin tones to become purplish or greenish. (Only available
when the video input is in NTSC format.)
Noise
Reduction
：
Decrease the picture noise in a weak signal. Switch to Auto / High /
Middle / Low / Off.
Main menu Adjustment Bar
NOTE:
It is best viewed with lower brightness and contrast settings in VGA mode.