Operation Manual

English Français Italiano

Deutsch

Español

Nederlands

V32MCAK E01-01EN 11/13/2007_ver.A-PD.paula

ARC - Aspect Ratio Control

Press ARC to adjust different picture format on the screen. Please

note: in some sources, some modes are only available.

Auto Image :

In this mode, the TV can automatically select the

suitable broadcast mode.

4:3 :

In this mode, will display traditional 4:3 broadcasts

for non-wide screen in the correct proportions.

There will be black strips at both sides of the

screen.

14:9 : In this mode, will display 14:9 broadcasts in the

correct proportions. There will be black strips at

both sides of the screen.

16:9 :

This mode expands the width of 4:3 broadcasts

evenly to fill the 16:9 screen.

PANORAMIC :

Expands 4:3 broadcasts to fit the 16:9 screen by

expanding the image at the edges of the screen.

This creates less distortion at the centre of the

screen.

ZOOM :

Displays broadcasts in letter box format in the

correct proportions. The top and bottom of the

images are slightly cropped.

APC - Automatic Picture Control

Press the APC button on the remote control repeatedly to cycle

through the APC settings. The button adjusts the different screen

brightness– Normal / Cinema / Dynamic

Normal : Select this mode in a normal environment.

Cinema : Select this mode in a dark environment.

Dynamic : Select this mode in a bright environment.

NOTE:

In VGA (PC) sources, the format of 16:9 and 4:3 modes are only available.