User's Manual

USE AND SETUP OF THE FINGERPRINT RECOGNITION DEVICE
■ How to Register to Use the Fingerprint Recognition Device
◄ Step 1. When you start up the Tablet PC, the
screen to your left will
appear and request that you register to use fingerprint recognition. Select
“Enroll” to start the registration process.
◄ Step 2. In the next “Verify Password” display, your Windows User Name
will have been filled out already. Please enter your Windows Password in the
password window, using the same password as when you login to Windows.
Press “Next” to continue or “Cancel” to quit.
◄ Step 3. Select the finger you wish to register and press it to the
corresponding on-screen illustration. Select “Back” to return to the “Verify
Password” screen, “Next” to register the fingerprint, or “Cancel” to exit the
program.
◄ Step 4. Proceed with the fingerprint input procedure. Please apply
appropriate pressure to the surface of the fingerprint recognition device. You
must correctly enter your fingerprint at most 8 times before fingerprint
verification can be completed.
Press your finger on the sensor and hold it there until the green light below the
fingerprint recognition display stops flashing. Remove your finger and place it
on the sensor again, repeating the process until the message that you have
completed registration is displayed.