Reference Guide

12
© COPYRIGHT 2006-2008 PRODEA SYSTEMS, INC. ALL RIGHTS RESERVED.
13
© COPYRIGHT 2006-2008 PRODEA SYSTEMS, INC. ALL RIGHTS RESERVED.
IMPORTANT: By default your wireless is enabled to 802.11 b/g, WPA-2 - AES+TKIP.
Your Wi-Fi network name is the last 6 digits of your MAC address and the key is the serial number
of your Home Center. See the Reference Card for more information on your default settings.
Wi-Fi Figure 1: ROS
sm
Login
Wi-Fi Figure 2: Wireless Settings Fields
Wi-Fi Figure 3: Click Save
(OPTIONAL) CONFIGURE WIRELESS (Wi-Fi)
ACCESS YOUR Wi-Fi NETWORK
Your wireless (Wi-Fi) network is already congured. Complete the following to connect to
your new wireless (Wi-Fi) network.
NOTE: Only make changes if instructed
while activating your ROS
sm
service or by
your service provider.
1 On your PC, right-click the wireless icon
in your system try (Wi-Fi gure 1) and
select View Available Networks.
2 Select the wirless network listed on your
Reference Card (Wi-Fi gure 2).
3 Enter the password listed on your
reference card. You are now connected
to the Home Center wireless network.
NOTE: Only change your default wireless
information if you know what you are doing
or are instructed by technical support as any
changes to your network may affect your
service.
1 On your computer, log into the ROS
sm
(Wi-Fi Figure 1) and select SETTINGS
> NETWORK > WIRELESS
2 Check the Enable Wireless
Connection
check box (Wi-Fi Figure
2).
3 In the Enter Wireless Network Name
(SSID) eld, enter a wireless network
name. Use a simple name containing
no personal information or special
characters, for example, “BILL” (Wi-Fi
Figure 2).
4 If you have a current security setting
such as WEP, WPA PSK, or WPA2 PSK,
select it. Otherwise, select a security
mode from the Select a Security
Mode drop-down list (Wi-Fi Figure 2).
5 Enter a password containing at least
nine characters and at least one
number, for example “sparekey1”. Use
a password that is easy to remember,
but not easily guessed by others (Wi-Fi
Figure 2).
6 Click Save. The ROS
sm
wireless service
is enabled (Wi-Fi Figure 3).
TIP: If you already have a wireless network,
use your current network name and security
setting (WPA or WEP) and the same
password for an easier transition to ROS
sm
routing services.
Wi-Fi gure 1
Wi-Fi gure 2