MSDS

ManualsBrandstattletale ManualsElectricalWireless Portable Alarm System Security Device Kit

- 1 -

Ascent Battery Supply, LLC

925 Walnut Ridge Drive

Hartland, Wisconsin 53029

Material Safety Data Sheet Sealed Lead Acid – AGM Type

The information and recommendations below are believed to be accurate at the date of preparation. Ascent Battery makes

no warranty of merchantability or any other warranty, express or implied, with respect to such information and we assume no

liability resulting from its use. This MSDS sheet provides guidelines for safe use and handling of the product. It does not and

cannot advise all possible situations. Your specific use of this product should be evaluated to determine if additional

precautions must be taken.

Company

Ascent Battery Supply, LLC

Emergency

Number

INFOTRAC (800) 535-5053

Address

Ascent Battery Supply, LLC

925 Walnut Ridge Dr.

Hartland, WI 53029

Overseas

Emergency

Number

INFOTRAC (800) 535-5053

Revision Date

08/22/05

SECTION 1 – IDENTITY

Product Name

Sealed Lead Acid Battery

Common

Synonyms

SLA, VRLA, AGM, Sealed Recombinent

DOT Description

Wet Battery, non-spillable

Chemical Name

Sealed Lead Acid; Secondary Battery

Battery

SECTION 2 – HAZARDOUS INGREDIENTS

Chemical Name CAS No. Percentage %

Lead 7439-92-1 50

Lead Dioxide 1309-60-0 21

Lead Sulfate 7446-14-2 1

Sulfuric Acid 7664-93-9 22

Case Material N/A 6

SECTION 3 – PHYSICAL AND CHEMICAL CHARACTERISTICS

Boiling Point

Melting Point

Polypropylene > 320º F

Vapor Pressure

Vapor Density

Specific Gravity

Lead, approx. 13

Percent Volatile By Volume

None

Solubility in Water

Reactivity in Water

Appearance and Odor

Rectangular polypropylene

or polystyrene case with lead

terminals

Evaporation Rate

Flash Point

Polypropylene case

675º F

Flammable Limits in Air %

by Volume

Extinguisher Media

Halon, dry chemical

Auto-Ignition Temperature

Special Fire

Fighting

Procedures

Extinguish fire with agent suitable for surrounding combustible materials. Cool exterior of battery if

exposed to fire to prevent or stop release of lead chemicals and fumes.

Unusual Fire and

Explosion Hazards

None

SECTION 4 – PHYSICAL HAZARDS

Stable or Unstable

Stable

Conditions to Avoid

Electrical shorting the battery.

Summary of content (2 pages)

PAGE 1
Ascent Battery Supply, LLC 925 Walnut Ridge Drive Hartland, Wisconsin 53029 Material Safety Data Sheet Sealed Lead Acid – AGM Type The information and recommendations below are believed to be accurate at the date of preparation. Ascent Battery makes no warranty of merchantability or any other warranty, express or implied, with respect to such information and we assume no liability resulting from its use. This MSDS sheet provides guidelines for safe use and handling of the product.
PAGE 2
Incompatibility (Materials to Avoid) Hazardous Decomposition Hazardous Polymerization Keep battery clear of strong oxidizers and solvents. NA Will Not Occur SECTION 5 – HEALTH HAZARDS Threshold Limit Value Signs and Symptoms of Exposure Medical Conditions Generally Caused by Exposure Routes of Entry Emergency and First Aid Procedures for 1. Inhalation 2. Eyes and Skin 4. Ingestion Permissible exposure limits Lead TVL 0.15mg/m³ PEL 0.