Fruit Press INSTRUCTION MANUAL DEAR CUSTOMER, Thank you for choosing our product. Please read this manual carefully before assembling or using the product, to avoid damage caused by improper use. Please pay special attention to the safety instructions. If the product is passed on to third parties, this manual has to be passed on along with the product.
WARNING • Read through the manual before assembly and use to avoid unnecessary personal injury or property damage. Save the manual for future reference. • Keep the working area clean and dry to avoid slipping or press movement! • Hard fruits must be crushed before pressing. • • Do not reach into the press with your hand while you start pressing. • Wash the parts with warm water after pressing and allow them to dry completely before storing the press in a dry, well-ventilated place.
PARTS LIST B A 1pc 1pc C D 1pc 8pcs E F 2pcs G 1pc 1pc 3
H I J 1pc K L 6pcs 1pc O 1pc 9pcs N M 6pcs P Q 3pcs R 3pcs 2pcs S 2pcs T 2pcs 9pcs 4 1pc
OPERATION Attention: before use, it is important to clean and sanitize any parts that come in contact with 1. Insert the spindle (H) into the central hole of the collecting tray (G), secured with a washer (I) and a spindle nut (J). Ensure the spindle is properly tightened. H R G I T J Attach the legs (O) to the curved plates under the tray, secured with screws(K), washers (L) and nuts (M). Use the provided wrench (Q) to secure the screws. M L O K S 2.
3. make the press more stable. N L S 4. P F 5. Put the fruit to be pressed into the bag. Caution: hard fruit must be crushed before being pressed. 6. Place the semi-circle pressing plates (E) on the top of the fruit, followed by wood blocks (D) and rectangle pressing plate (C) placed at right angles to the previous ones.
Q C D E 7. Thread the angle iron (A) down the spindle and insert either end of the handle (B) into the opening of the iron. A B 8. Put a container (not included) under the spout of the tray to collect the juice or wine. 9. Start pressing by turning the handle clockwise. Maintenance Having completing the job, wash the parts with hot water. Store the press in a dry room for the pressing cage wood to dry well.
