Installation Guide

Step 4 Step 6Step 5
Cutting Board
countertop
Installation steps
Step 1
Place the cutting board flat on the
table, making sure that the edge of the
cutting board is parallel to the edge of
the table
Carefully place the sink upside down on
the countertop, positioning it within the
outline.
Step 2
Use a suitable tool to extend the line
cutting table shown on the cutting
board. (be careful)
Placing the bracket flat against the sink
lip. Screw the wing bolts tighten snugly.
Step 3
Using a good quality silicone caulk,
Apply a generous bead of silicone to
the perimeter of the sink’s rim.
Carefully turn the countertop and
attached sink over. Remove any excess
silicone and let silicone dry.