Installation Guide

SS3219R10-055R00O

Specification

17″(433mm)

19″(483mm)

32″(813mm)

30″(763mm)

28″(710mm)

10″(254mm)

Material:Type304

Material thickness: 16 Gauge/ 1.5mm

Inner Sizes: 30'' x 17'' x 10''

Outer Sizes: 32'' x 19'' x 10''

Recommended Installation Type: Undermount

PAGE 1
30″(763mm) 32″(813mm) SS3219R10-055R00O Outer Sizes: 32'' x 19'' x 10'' Inner Sizes: 30'' x 17'' x 10'' Material thickness: 16 Gauge/ 1.
PAGE 2
countertop Step 1 Step 2 Step 3 Place the cutting board flat on the table, making sure that the edge of the cutting board is parallel to the edge of the table Use a suitable tool to extend the line cutting table shown on the cutting board. (be careful) Using a good quality silicone caulk, Apply a generous bead of silicone to the perimeter of the sink’s rim. Step 4 Step 5 Step 6 Carefully place the sink upside down on the countertop, positioning it within the outline.