Use and Care Manual
Step 1
Open the carton and place all the parts on a clean, non-marring surface.
Caution : Do exercise Caution to ensure that your fingers do not get caught or pinched in theassembly
process.
Step 2
Position the Chair Seat(A) on its back, on a clean, non-marring surface.
Attach one leg (C) to the bottom of Chair Seat bottom (A) by using 3 pieces of
Bolts (②)and 3 pieces of Flat Washers (①) as shown. Repeat the same steps to attach another 7 pcs leg(C) to the
bottom of Chair and Ottoman.
Tighten all of the Bolts fully by the Allen Key (③) in a sequential manner.
Step 3
Turn over the Chair and Ottoman right up as shown.
The Chair is ready for use now!
Tip: Adjust the Pre-attached Levellers on the chair Legs until the chair is level with the ground.
Caution: This Chair can only be used on a flat, level surface.
C: 8pcs
B
A
① ②
The leveller can be adjustable.
③
③
A
B
C
C
C
C
C
C
C