User Manual
Step 3: Remove the Inert Cartridges
Use the left hand to unload cartridges beginning with the rightmost bay. By unloading from
right to left (or left to right if the right hand is used) it is less likely the operator will place
ngers in front of the blast doors of loaded cartridges.
To unload the Inert Cartridges, follow these steps:
1 Press the cartridge release button.
2 Firmly pull the cartridge out of the bay by pulling on the upper tab and lower tab of
the cartridge. If the expended cartridge feels as if it is binding in the cartridge bay and
won’t easily dislodge, try rmly pressing on the cartridge ejector directly below the
individual cartridge that is dicult to remove.
Cartridge Release Button