Instruction Manual

To load the Smart cartridges, follow these steps:
1 Point the CEW in a safe direction.
2 Ensure that the safety switch is in the down (SAFE) position and your finger is not on the
trigger or ARC switch.
3 Ensure the protective shipping cover is removed from the Smart cartridge.
4 Keeping your hand away from the blast doors, place the Smart cartridge into the
cartridge bay until an audible click is heard. (Fig. 1)
5 Verify that the cartridge is secure by pulling on the tabs on the lower and upper part of
the cartridge. (Fig. 2)
Fig. 1
Fig. 2