EVIDENCE Sync User Manual TASER For use with: AXON® body and AXON flex® cameras TASER CAM™ and TASER CAM HD recorders X2™, X26™, and X26P™ conducted electrical weapons IMPORTANT SAFETY INSTRUCTIONS Read all warnings and instructions. Save these instructions. The most up-to-date warnings and instructions are available at www.TASER.com.
Contents Chapter 1: Introduction...................................................................................................................................................4 A Brief Look at EVIDENCE Sync ...............................................................................................................................4 Buttons.....................................................................................................................................................................
Previewing TASER AXON Videos with EVIDENCE Sync (Offline) ..................................................................... 41 Editing the Title of a File with EVIDENCE Sync (Offline)..................................................................................... 44 Downloading TASER AXON Videos with EVIDENCE Sync (Offline) .................................................................. 45 Viewing Downloaded Videos with EVIDENCE Sync (Offline).....................................................
Chapter 1: Introduction EVIDENCE Sync software enables you to transfer device event records and video from a TASER X2, X26, or X26P conducted electrical weapon (CEW),1 TASER CAM or TASER CAM HD recorder, or AXON body or AXON flex camera to a computer or the EVIDENCE.com website. The software also enables you to adjust settings on these TASER devices. EVIDENCE Sync is available only for use with Microsoft Windows-based computers. This manual is intended for EVIDENCE Sync end users.
In Figure 2, the same CEW and recorder are connected to the computer, but the recorder is the selected device and its details are displayed. Check boxes to select videos for upload Filter information displayed on the screen Video status—on the recorder, uploaded to EVIDENCE.com, uploading (transferring), or awaiting upload Selected device (has a white border) Upload video to EVIDENCE.
Toggle button to display the files in table view Figure 3 Screen appearance and options will vary depending on the type of TASER product you are using with EVIDENCE Sync. These differences are explained in this manual. Buttons Download a copy of the CEW event logs in PDF format. Upload all videos stored on a device. Download a graph of the X2 or X26P pulse logs in PDF format. Upload the selected videos to EVIDENCE.
Accept edits or changes. Cancel edits or changes. Close a view. Log out of online mode. Change the ID assigned to all videos displayed in the video list. Assign categories to all videos displayed in the video list. Assign someone to all videos displayed in the video list. Play video. Return to the previous screen. Upload the video to the EVIDENCE.com website. Click to adjust the video playback volume settings. You will be able to increase or reduce the volume, or turn the sound off.
Filter To apply limitations to the information displayed on an EVIDENCE Sync screen. This feature enables you to quickly find records of a specific type, or records that occurred within a range of time. Firmware Computer programming that is embedded in the hardware. EVIDENCE Sync can be used to update the firmware in TASER devices. Muted A state in which a TASER CAM2 or TASER CAM HD recorder or AXON flex or AXON body camera has its microphone turned off.
Online View CEW pulse graph ● Upload to EVIDENCE.
Chapter 2: Installing EVIDENCE Sync Software Note: Do NOT connect a TASER device to your computer at this step. 1. On your computer, close all open applications. 2. Launch your Web browser. 3. Go to http://info.taser.com/syncregistration.html. 4. Fill out the information and click Submit (Figure 4). Figure 4 You should receive a confirmation e-mail in 24–48 hours. 5. After receiving a confirmation e-mail, follow the instructions in the message. 6.
Chapter 3: EVIDENCE Sync Settings Auto-Update When started, EVIDENCE Sync automatically installs available software updates. This process only updates the EVIDENCE Sync software, and does not update the firmware in any TASER devices attached to the computer. • • • In online mode, automatic update occurs after you log in. In offline mode, it will occur when EVIDENCE Sync is launched and has an active internet connection.
Figure 6 Figure 7 Changing the Destination Folder for Downloaded Files EVIDENCE Sync has a default folder for saving downloaded TASER CAM and AXON videos and CEW logs.5 If you prefer to put the files in a different location, follow the steps in this procedure. 5 1. Click Start and select All Programs. 2. Click SYNC and select SYNC. 3. Click SYNC, select Mode, and then select Offline (Figure 8). The CEW logs are saved in PDF format.
Figure 8 4. Click SYNC, select Data Folder, and then select Change (Figure 9). Figure 9 5. Click the Libraries folder and navigate to where you want to put the videos (Figure 10).
Figure 10 6. After navigating to the new location, click Select Folder (Figure 11). Figure 11 Scheduling Automatic Uploads The Auto-Upload feature allows you to upload files and evidence from your local directory to your EVIDENCE.com account without having to manually do so at your computer. For this to work, your computer must have an active Internet connection. These uploads will occur even if you are signed out of EVIDENCE Sync, and even if you are logged out of your Windows account. 1.
4. Type your login information and click Sign in. 5. In the navigation pane, navigate to the folder containing the files you want to upload. The file path may be Computer > OSDisk (C:) > Program Files (x86) > SYNC > Videos (Figure 12). 6. Click Schedule Auto-Uploads. Navigation pane Figure 12 7. Schedule your uploads (Figure 13).
Figure 13 Configuring Upload Bandwidth 1. Click Start and select All Programs. 2. Click SYNC and select SYNC. 3. Click SYNC, select Mode, and then select Online. 4. Type your login information and click Sign in. 5. Click Upload Settings and select Throttle Bandwidth (Figure 14).
Figure 14 6. Configure your system’s bandwidth, as appropriate (Figure 15).
Chapter 4: Connecting TASER Devices to a Computer Connecting CEWs to a Computer The TASER X2, X26, and X26P CEWs are connected to a computer with a dataport plug that is inserted into the weapon in place of the battery pack. The other end of the dataport cable fits the USB port of the computer. There is one dataport plug designed for the X26 CEW and another dataport plug design that works with both the X2 and X26P CEWs.
Figure 18 Do Not Insert the Plug This Way Connecting TASER AXON Cameras to a Computer The AXON flex and AXON body cameras use a 2.5 mm to USB cable to connect to a computer. DO NOT plug an AXON flex controller into a computer for registration or downloading. Familiarize yourself with the differences between an AXON flex controller and an AXON body camera (Figure 19, Figure 20). Figure 19 AXON flex camera AXON flex controller AXON body camera Figure 20 AXON flex camera, 2.
Chapter 5: Using EVIDENCE Sync with TASER CAM Recorders Viewing Records The illustrations in this chapter show an X26P CEW with a TASER CAM HD recorder, but the procedures will be the same if you are using an X2 CEW with your recorder. The procedures also will be the same if you are using an X26 CEW and a TASER CAM recorder. Note: You can perform these procedures without the recorder installed in a CEW.
Figure 21 7. Click the recorder so it is selected (Figure 22). Click the recorder to select it Figure 22 8. Click the title of the video you want to view. 9. Click the Click here to play button (Figure 23).
Figure 23 10. Click the Play button and watch the video (Figure 24). Figure 24 If you want, you can upload the video to EVIDENCE.com by clicking the Upload button and going to step 11.
TASER CAM Records to EVIDENCE.com Services and Adding Categories to Videos with EVIDENCE Sync Software (Online). 11. Keep the recorder connected to the computer during the upload process. 12. After the uploads are completed, unplug the cable from the recorder. After unplugging the cable from the recorder, remember to replace the dataport plug on the recorder to prevent damage from any debris or moisture. Uploading TASER CAM Records to EVIDENCE.
• Your ID should appear in the Assignee boxes. If you need to change the person assigned to the videos, type the appropriate ID in the boxes. If the same person will be assigned to all videos, click the Bulk Edit Assignee box. Figure 26 5. Click Upload (Figure 27).
6. Wait for the videos to upload (Figure 28). Keep the recorder connected to the computer during the upload process. Upload status Upload status Figure 28 7. If you want to remove uploaded videos from the queue, click Clear Completed (Figure 29). Note: Videos will remain stored on the recorder (until overwritten by new footage) whether they are uploaded or not.
Figure 29 8. After the uploads are completed, unplug the cable from the recorder. After unplugging the cable from the recorder, remember to replace the dataport plug on the recorder to prevent damage from any debris or moisture. Viewing Uploaded TASER CAM Videos You can view your uploaded videos by accessing the EVIDENCE.com website. You also can access uploaded videos through EVIDENCE Sync. This procedure describes how to view uploaded videos through EVIDENCE Sync. 1.
Uploaded videos Select from the uploaded videos Figure 30 4. Type your EVIDENCE.com credentials and click Sign In (Figure 31). Figure 31 You now can view your video on EVIDENCE.com (Figure 32).
Play Figure 32 Offline Mode Previewing TASER CAM Videos with EVIDENCE Sync (Offline) You can preview videos before downloading them. 1. Confirm that the CEW’s safety is in the down (SAFE) position. DO NOT shift the CEW’s safety switch to the up (ARMED) position while the TASER CAM recorder is connected to the computer. 2. Remove the cartridges from the CEW. (See the applicable CEW user manual for more information on unloading cartridges.) 3.
Figure 33 7. Click the TASER CAM recorder so it is selected (Figure 34). Click the recorder to select it Figure 34 8. Click the title of a video you want to watch (Figure 35). 9. Click the Click here to play button.
Click file to select it Play Figure 35 10. Click the Play button (Figure 36). Figure 36 11. Keep the recorder connected to the computer during the playback process. After you are done, unplug the cable from the recorder. After unplugging the cable from the recorder, remember to replace the dataport plug on the recorder to prevent damage from any debris or moisture.
Downloading TASER CAM Videos with EVIDENCE Sync (Offline) 1. Perform steps 1–7 of Previewing TASER CAM Videos with EVIDENCE Sync (Offline). 2. Click the check boxes next to the videos you want to download (Figure 37). Videos will remain stored on the recorder (until overwritten by new footage) whether they are downloaded or not. Note: When a CEW is connected, the CEW’s data will be downloaded automatically into EVIDENCE Sync from the CEW. Selected videos Figure 37 3. Click Download Selected.
Files waiting for download Download progress Status of files selected for download Figure 38 When download is complete, the Status column will update accordingly (Figure 39). Figure 39 4. Keep the recorder connected to the computer during the download process. 5. After the downloads are completed, unplug the cable from the recorder. After unplugging the cable from the recorder, remember to replace the dataport plug on the recorder to prevent damage from any debris or moisture.
Viewing Downloaded Videos (Offline) Follow these steps for viewing videos that have already been downloaded. It is not necessary to have a recorder connected to the computer to perform this procedure. 1. Click Start and select All Programs. 2. Click SYNC and select SYNC. 3. Click SYNC, select Mode, and then select Offline. 4. Click SYNC, select Data Folder, and then select Open (Figure 40). Figure 40 5. Double-click the video file you want to watch (Figure 41).
Viewing Videos in MDT Mode If you connect your recorder to an MDT, follow these steps. MDT mode is similar to offline mode, but in MDT mode you cannot download video. 1. Confirm that the CEW’s safety is in the down (SAFE) position. DO NOT shift the CEW’s safety switch to the up (ARMED) position while the TASER CAM recorder is connected to the computer. 2. Remove the cartridges from the CEW. (See the applicable CEW user manual for more information on unloading cartridges.) 3.
Selected video Figure 43 10. Keep the recorder connected to the computer while you watch the videos. 11. After you have finished watching videos, unplug the cable from the recorder. After unplugging the cable from the recorder, remember to replace the dataport plug on the recorder to prevent damage from any debris or moisture.
Chapter 6: Using EVIDENCE Sync with TASER AXON Cameras This chapter shows an AXON flex camera used with EVIDENCE Sync, but the procedures are the same with an AXON body camera. Online Mode Previewing TASER AXON Videos with EVIDENCE Sync (Online) 1. Connect the camera to your computer with the 2.5 mm to USB cable. 2. Click Start and select All Programs. 3. Click SYNC and select SYNC. 4. Type your login information and click Sign in. Figure 44 5.
Figure 45 6. Click the Play button and watch the video.
Adding Categories to Records with EVIDENCE Sync (Online) This procedure explains how to add information to a record, one record at a time. If you need to bulk update a record (add information to multiple records at once), read Uploading Records to EVIDENCE.com with EVIDENCE Sync (Online). 1. Perform steps 1–4 of Previewing TASER AXON Videos with EVIDENCE Sync (Online). 2. Click the Edit button on the video you want to update (Figure 47). Edit buttons Figure 47 3. Add the categories.
Figure 48 Uploading Records to EVIDENCE.com with EVIDENCE Sync (Online) Note: When this procedure is complete, videos uploaded to EVIDENCE.com will be automatically removed from your TASER AXON camera. 1. Perform steps 1–4 of Previewing TASER AXON Videos with EVIDENCE Sync (Online). 2. Click the check box next to the video(s) you want to upload (Figure 49). 3. Click Next.
Figure 49 4. • If you want to update the files in bulk, go to step 4. • If you want to upload all the files now, go to step 5. Add the categories. You have several options for categorizing TASER CAM videos (Figure 50). 5. • Replace the system-generated title with a new one. • Apply an appropriate ID for a video by typing it in the Edit ID box. If appropriate, you can add the same ID to all videos on this screen by clicking Bulk Edit ID first.
Figure 50 The screen will show progress as the system processes and completes the upload. Files in the upload queue File status (transferring to EVIDENCE.com) Upload progress Figure 51 Offline Mode Previewing TASER AXON Videos with EVIDENCE Sync (Offline) 1. Connect the camera to your computer with the 2.5 mm to USB download cable.
2. Click Start and select All Programs. 3. Click SYNC and select SYNC. 4. Click SYNC, select Mode, and then select Offline (Figure 52). Figure 52 5. Click the title of the video you want to watch (Figure 53). 6. Click the Click here to play button.
Figure 53 7. Click the Play button (Figure 54).
Editing the Title of a File with EVIDENCE Sync (Offline) The offline mode offers fewer options than online mode for adding notes to video. In offline mode you can modify the title, but not the case ID. Also, you cannot add categories in offline mode. 1. Perform steps 1–4 of Previewing TASER AXON Videos with EVIDENCE Sync (Offline). 2. Click the title of the video you want to modify (Figure 55). 3. Click the Edit button. Figure 55 4. In the Title box, type the update to the title (Figure 56).
Figure 56 Downloading TASER AXON Videos with EVIDENCE Sync (Offline) 1. Perform steps 1–4 Previewing TASER AXON Videos with EVIDENCE Sync (Offline). 2. Click the check box(es) next to the video(s) you want to download (Figure 57). Figure 57 3. Click Download Selected (Figure 58).
File status Figure 58 Viewing Downloaded Videos with EVIDENCE Sync (Offline) 1. Perform steps 1–4 of Previewing TASER AXON Videos with EVIDENCE Sync (Offline). In the Status column, downloaded videos are described as Downloaded (Figure 59). Downloaded files Figure 59 2. Click the title of the video you want to watch (Figure 60).
3. Click Click here to play and watch the video. Figure 60 Removing Videos from a TASER AXON Camera (Offline) When a TASER AXON camera’s memory is full (has reached its storage limit), the camera will stop recording. To prevent this, you must either upload the videos to EVIDENCE.com or, if you are in the offline mode, manually remove the videos after downloading them. 1. Perform the Downloading TASER AXON Videos with EVIDENCE Sync (Offline) procedure. 2.
Figure 61 4. Click OK (Figure 62).
MDT Mode Loading Categories with EVIDENCE Sync (MDT) Notes: • • • • To perform this procedure, you need to be connected to the Internet. Your camera’s Device Mode must be set to Online for this procedure to work. See Configuring Your TASER AXON Camera and Updating the Firmware (Online) in Chapter 9: Configuring Your TASER CAM Recorder, TASER AXON Camera, or CEW for more information. Unlike with online and offline modes, there is no way to remove videos from the camera in MDT mode.
Figure 64 7. Click Retrieve. The “Remote categories loaded” message is displayed (Figure 65). Figure 65 Adding Categories (MDT) 1. Perform the Loading Categories with EVIDENCE Sync (MDT) procedure.
2. Click the camera so it is selected (Figure 66). 3. Click the check box next to the video you want to update and then click Next. Figure 66 4. Type the case ID in the Edit ID box (Figure 67). 5. In the Edit Categories box, use the drop-down menu to select all applicable categories. 6. Click Save.
Figure 67 Page 52 of 86
Chapter 7: Uploading Other File Types to EVIDENCE.com EVIDENCE Sync is not limited to files produced by TASER devices. You can use EVIDENCE Sync to add identifying information to any digital file and upload it EVIDENCE.com. This procedure only works in the online mode. 1. Save the file to your computer. 2. Click Start and select All Programs. 3. Click SYNC and select SYNC. 4. Type your login information and click Sign in. The main screen displays (Figure 68).
Figure 69 5. Select the file (or files) you want to upload (Figure 70). 6. Click Next. Figure 70 You can add details to your file (Figure 71). 6.a Type the case ID in the Edit ID box. 6.b In the Edit Categories box, use the drop-down menu to select all applicable categories.
6.c 7. Reassign the file, if appropriate. Click Upload.
Chapter 8: Viewing CEW Logs Introduction to CEW Records When you are in the online mode, the logs are automatically uploaded to EVIDENCE.com. The type of information collected depends on the type of CEW you have. Information displayed in Figure 72, for an X26 CEW, includes: • • Sync (CEW was connected to the computer and the time was synchronized) Trigger pulls, with the discharge time and duration, CEW temperature, and battery percentage.
Event type Produce your CEW logs in PDF format Event duration Figure 72 X26 Records The X26P and X2 CEWs include more detail than is available with the X26 CEW (Figure 73, Figure 74). You can produce the pulse logs for your X26P and X2 CEWs by clicking the Graphs button. Note: Producing a graph will automatically save a PDF copy to your computer.
If you are using an X2 CEW, there will be additional information, such as cartridge deployment by bay and ARC switch events (Figure 74). Figure 74 X2 Records Viewing CEW Records with EVIDENCE Sync (Online) 1. Confirm that the CEW’s safety is in the down (SAFE) position. 2. Remove the cartridges from the CEW. (See the applicable CEW user manual for more information on unloading cartridges.) 3. Connect the CEW to your computer with the USB download cable. 4. Click Start and select All Programs. 5.
Notes: • Pulse log information is not available in the offline or MDT mode. In the offline mode, event logs are not uploaded to EVIDENCE.com; however, you can generate event logs in PDF format. • Clicking PDF Report will automatically save a PDF copy to your computer.
Chapter 9: Configuring Your TASER CAM Recorder, TASER AXON Camera, or CEW Configuring TASER CAM Recorders and Updating the Firmware (Online) Notes: • • • 1. This procedure illustrates a TASER CAM HD recorder, but the process is the same with a TASER CAM recorder.9 If you are an Administrator, the changes you make to the agency-level device settings will affect all devices in your agency after the devices are connected to EVIDENCE Sync.
Edit Device Name Edit Assignee Microphone on or off Figure 77 Accept change Cancel change Figure 78 4. Keep the recorder connected to the computer during configuration. 5. After configuration is completed, unplug the cable from the recorder. After unplugging the cable from the recorder, remember to replace the dataport plug on the recorder to prevent damage from any debris or moisture.
Configuring TASER CAM Recorders and Updating the Firmware (Offline) 1. Perform steps 1–7 of Previewing TASER CAM Videos with EVIDENCE Sync (Offline). 2. Click Device Settings. Some jurisdictions require the TASER CAM recorder to be video-only (no sound recorded). If your organization operates in such a jurisdiction, select the Muted option. You also can adjust the resolution and frame rate (Figure 79). If you want to update the recorder’s firmware, go to step 3. Figure 79 3.
Figure 81 7. Wait until the “Reconnect device to use updated firmware” message displays (Figure 82). Figure 82 8. Un-connect the recorder and then reconnect it to the computer.
Configuring TASER CAM Recorders (MDT) 1. Perform steps 1–7 of Viewing Videos in MDT Mode. 2. Click Device Settings. Some jurisdictions require the TASER CAM recorder to be video-only (no sound recorded). If your organization operates in such a jurisdiction, select the Muted option. You also can adjust the resolution and frame rate (Figure 83). Note: Resolution and frame rate are adjustable with the TASER CAM HD recorder, but not with the TASER CAM recorder.
8. Configure the device, as appropriate. Whether you have an X2 (Figure 84), X26 (Figure 85), or X26P CEW (Figure 86), you can update the Device Name and Assignee. If your CEW is an X2, you have additional options: • Determine whether an automatic shut-down performance power magazine (APPM) will stop only trigger-initiated CEW discharges or both trigger and ARC switch events. See the TASER X2 CEW User Manual for more information on APPM functioning. • Turn the LASER for 35-foot (10.
Edit device name Edit assignee Figure 85 X26 Settings Edit device name Edit assignee Figure 86 X26P Settings Configuring Your CEW and Updating the Firmware (Offline) In offline mode, you can view CEW status. You also can update the firmware of an X2 or X26P CEW. 1. Confirm that the CEW’s safety is in the down (SAFE) position.
2. Remove the cartridges from the CEW. (See the applicable CEW user manual for more information on unloading cartridges.) 3. Connect the CEW to your computer with the USB download cable. 4. Click Start and select All Programs. 5. Click SYNC and select SYNC. 6. From the SYNC menu, click Mode and select Offline. 7. Click Device Settings. The information and options should be the same whether you have an X2 (Figure 87), X26P (Figure 88), or X26 (Figure 89) CEW.
Figure 88 X26P Device Settings Figure 89 X26 Device Settings 8. Go to www.TASER.com and download the appropriate CEW firmware to your computer. 9. In EVIDENCE Sync, click Program Firmware. 10. Navigate to the firmware you downloaded (Figure 90).
Figure 90 11. Click Open. 12. Wait for the system to update your CEW’s firmware (Figure 91). Figure 91 Configuring Your TASER AXON Camera and Updating the Firmware (Online) Notes: • If you are an Administrator, the changes you make to the agency-level device settings will affect all devices in your agency after the devices are connected to EVIDENCE Sync. These settings cannot be changed by someone with non-administrative permissions.
• Depending on your access settings, some of the options described here might not be available to you. 1. Connect the camera to your computer with the 2.5 mm to USB cable. 2. Click Start and select All Programs. 3. Click SYNC and select SYNC. 4. Type your login information and click Login. If you receive a message that your firmware needs an update (Figure 92), follow the onscreen instructions. Figure 92 5. Click the Device Settings tab. 6.
Figure 93 AXON flex Settings Figure 94 AXON body Settings Configuring Your TASER AXON Camera and Updating the Firmware (Offline and MDT) 1. Connect the camera to your computer with the 2.5 mm to USB cable. 2. Click Start and select All Programs.
3. Click SYNC and select SYNC. 4. Click the Device Settings tab. 5. Click SYNC, select Mode, and then select Offline or MDT. 6. Configure the device as appropriate (Figure 95, Figure 96). Your options are similar to those described in Configuring Your TASER AXON Camera and Updating the Firmware (Online). However, in offline mode, the devices have no device name or assignee. Note: In MDT mode, you may be limited to changing the camera orientation.
Figure 96 AXON body Settings 7. Go to www.TASER.com and download the appropriate AXON firmware to your computer. 8. In EVIDENCE Sync, click Program Firmware. 9. Navigate to the firmware you downloaded (Figure 97). Figure 97 10. Click Open. 11. Wait for your camera’s firmware to update.
Chapter 10: Filtering Records EVIDENCE Sync filtering tools enable you to reduce the information displayed onscreen. This helps if you need to find specific date and time records. Filtering CEW Logs Note: This procedure shows the online mode and includes the login steps. Except login, the steps will be the same in offline and MDT modes. 1. Confirm that the CEW’s safety is in the down (SAFE) position. 2. Remove the cartridges from the CEW.
Figure 99 Start Time Figure 100 Start Date Figure 101 Events 7. Select your start time, start date, end time, end date, and event type. EVIDENCE Sync allows you to quickly specify the month (Figure 102) and year (Figure 103). You do not have to scroll through multiple months.
Figure 102 Figure 103 8. Filter the events as needed. 9. Click the ON button to turn the filters on. 10. The information displayed is narrowed to your requirements. In Figure 104, the information displayed is within a specified date and time range, and only armed events are shown (USB events are hidden from view).
Figure 104 Filtering TASER CAM Videos Note: This procedure shows the online mode and includes the login steps. Except login, the steps will be the same in offline and MDT modes. 1. Confirm that the CEW’s safety is in the down (SAFE) position. DO NOT shift the CEW’s safety switch to the up (ARMED) position while the TASER CAM recorder is connected to the computer. 2. Remove the cartridges from the CEW. (See the applicable CEW user manual for more information on unloading cartridges.) 3.
Toggle filters on or off Start time Start date Stop time End date Select event type Figure 105 Figure 106 Figure 107 Page 78 of 86
Figure 108 8. Select your start time, start date, end time, end date, and event type. EVIDENCE Sync allows you to quickly specify the month (Figure 109) and year (Figure 110). You do not have to scroll through multiple months. Click here Figure 109 Click here Figure 110 9. From the Status menu, use the drop-down to select whether to display all videos, videos that are on the device (On device) or videos that have been transferred (Complete) (Figure 111).
Figure 111 10. Click the ON button to turn the filter on. The information displayed is narrowed to your requirements. In Figure 112, the information displayed is within a specified date and time range. Figure 112 11. Keep the recorder connected to the computer during this procedure. 12. After you are done looking at the records, unplug the cable from the recorder.
Toggle filters on or off Start time Start date Stop time End date Select event type Figure 113 Figure 114 Start Time Page 81 of 86
Figure 115 Date Figure 116 Video Status 5. Select your start time, start date, end time, and end date. EVIDENCE Sync allows you to quickly specify the month (Figure 117) and year (Figure 118). You do not have to scroll through multiple months.
Click here Figure 118 6. From the Status menu, use the drop-down to select whether to display videos that are on the device (On device) or videos that have been transferred (Complete) or all of them (Figure 119). Figure 119 7. Click the ON button to turn the filters on. The information is narrowed to your requirements (Figure 120).
Sorting AXON Videos This is a different process than that described in Filtering AXON Videos. Filtering excludes videos from the view based on criteria. Sorting videos places them in order. Note: This procedure shows the online mode and includes the login steps. Except login, the steps will be the same in offline and MDT modes. 1. Connect the camera to your computer with the 2.5 mm to USB cable. 2. Click Start and select All Programs. 3. Click SYNC and select SYNC. 4.
Chapter 11: Connecting Multiple TASER Devices to EVIDENCE Sync If your hardware allows it, you can connect multiple TASER devices to EVIDENCE Sync at once. There are several ways to do this: • • Use more than one USB port on your computer. Attach EVIDENCE.com Dock individual bays or an EVIDENCE.com Dock 6-bay to your computer. This approach enables you to connect multiple AXON flex and/or AXON body cameras to your computer.
TASER Product functions and specifications may change without notice and the actual product may vary from the illustrations in this manual. Windows is a trademark of Microsoft Corporation. Smart, TASER CAM, M26, X2, X26, and X26P are trademarks of TASER International, Inc. TASER is a trademark of TASER International, Inc.
