Spec Sheet

MX-8A
0083a -1-
Jan, 2019
Product Spec Sheet
MATRIX MIXER
MX-8A
Specifications
General
FORMAT
44.1 k/48 kHz, 16 bit/24 bit
Input/output ratings
USB port
Connector: 4-pin USB B-type
Transfer rate: USB 2.0 High Speed (480 Mbps)
ANALOG IN connectors
Connector: Euroblock (balanced) 3.81 mm pitch
Minimum input level: -77.5 dBu
Maximum input level: +26 dBu (MIC)
Maximum input level: +24 dBu (LINE)
Input impedance: 2.2 kΩ or higher
ANALOG OUT connectors
Connector: Euroblock (balanced) 3.81 mm pitch
Nominal output level: +4 dBu (when Ref.Level set to other than -9 dBFS)
+6 dBu (when Ref.Level set to -9 dBFS)
Maximum output level (switchable):
+15 dBu (Ref.Level: -9 dBFS)
+18 dBu (Ref.Level: -14 dBFS)
+20 dBu (Ref.Level: -16 dBFS)
+22 dBu (Ref.Level: -18 dBFS)
+24 dBu (Ref.Level: -20 dBFS)
Output impedance: 200 Ω or lower
RS-232C connector
D-sub 9-pin (female, inch-standard)
RS-485 connector
Connector: RJ-45
Cables: category 5e or faster STP cables
Ethernet connector
Connector: RJ-45
Transmission protocol: TCP/IP
Ethernet standard: 100BASE-TX

Summary of content (2 pages)