Users Manual Part 1

TASCAM Model 16
45
8 - Mark functions
Marks can be used to cue for playback, for example.
In addition to use with this unit, mark information added to WAV
files can be used with software, for example, that supports the
BWF format.
Using mark functions
In order to set and clear marks, the Home Screen F4 button
function must be switched from
to .
1. On the TZTUFN Screen, select LFZ!GVODUJPO to open the
LFZ!GVODUJPO Screen. (See “Menu operation procedures”
on page 28)
2. Press the MULTI JOG dial to open the G5!LFZ Screen.
3. Turn the MULTI JOG dial to select NBSL.
4. Press the MULTI JOG dial to confirm the setting.
The LFZ!GVODUJPO Screen reopens.
NOTE
When the F4
button function has been changed, the
built in effect can be turned on/off with the F3
button
on the EFFECT Screen. (See “Using the built-in effects” on
page 38)
Adding marks
When playing or recording, press the F4 button to add a
mark at the current point.
When a mark is added, a pull-up showing the mark number
appears at the bottom of the display.
Mark icons appear below the playback position bar where
marks are set.
p The \!yy!^ in the mark name is a number given to all marks
that is incremented in order.
p Marks added during recording will automatically be saved in
the song when recording stops.
p Marks added during playback will not be automatically
saved. Save song information after stopping playback to save
mark data. (See “Saving the current song” on page 34)
NOTE
If an
icon appears at the beginning of a song name, it has
unsaved mark data. Save the song information to save the
mark data. (See “Saving the current song” on page 34)
Moving between marks
When stopped, paused or playing back, press the m or ,
button
to move (skip) to the previous or next mark.
When skipping, the mark name appears in a pull-up at the
bottom of the display.
Clearing individual marks
Marks can be cleared when stopped or paused.
1. Skip to a mark that you want to delete when stopped or
paused. (See “Moving between marks” on page 45)
2. Press the F4
button to open the Mark Clear
confirmation screen.
3. Press the F4 button to clear the mark.
NOTE
i Repeat steps 1 - 3 to clear multiple marks.
i To clear all marks in the current song, select the DMS!BMM!
NBSLT item from the menu list shown on the TPOH Screen.
(See “Clearing all marks” on page 34)