Users Manual Part 1
32
TASCAM Model 16
3 - Preparation
Setting the built-in clock date and
time
Using its internal clock, this unit includes the date and time
when a file is recorded.
1. On the TZTUFN Screen, select EBUF0UJNF to open the EBUF0
UJNF Screen. (See “Menu operation procedures” on page
28)
2. Turn the MULTI JOG dial to change a value, and press the
MULTI JOG dial to confirm it and move the cursor to the
next item.
NOTE
Use the F2
and F3 buttons to move the cursor.
3. Change the year, month, day, hour and minute in order, and
complete the date and time setting.
4. Press the F4
button to confirm the setting and return
to the TZTUFN Screen.
NOTE
i When making a setting, you can press the F1
button to
cancel the changes and return to the TZTUFN Screen.
i When setting the time, the time display will be stopped.
i By setting the UZQF item to “EBUF” on the TPOH!OBNF Screen,
the date and time set here can be used for song names. (See
“Setting the song name format” on page 46)
Adjusting the display
The display contrast and brightness can be adjusted.
Adjusting the display contrast
1. On the TZTUFN Screen, select EJTQMBZ to open the EJTQMBZ
Screen. (See “Menu operation procedures” on page 28)
2. Adjust the display contrast.
Options: 21–51 (default:
39)
3. Press the MULTI JOG dial to confirm the setting.
4. Press the F1
button to return to the NFOV Screen.
Adjusting the display brightness
1. On the TZTUFN Screen, select EJTQMBZ to open the EJTQMBZ
Screen. (See “Menu operation procedures” on page 28)
2.
Press the MULTI JOG dial to move the cursor to the EJNNFS
item.
3. Adjust the display brightness.
Options: IJHI (default), MPX
4. Press the MULTI JOG dial to confirm the setting.
5. Press the F1
button to return to the NFOV Screen.
Preparing an SD card for use
In order to make an SD card usable in this unit, whether for
recording or playback, this unit must be used to create a system
file on it first.
ATTENTION
In order to record, this unit must be used to format it first.
(See “Formatting SD cards” on page 47)
1. “Op!tzt!gjmf/!Nblf!tzt!gjmf/!Bsf!zpv!tvsf@” appears
in a pop up when a new card or a card formatted by
another device is inserted into the unit.
2. Press the MULTI JOG dial to create a system file.
When system file creation is complete, the Home Screen
will reopen.