Owner's Manual

Models compatible for installation
Before installing this card, check the TEAC Global Site (https://teac-global.com/) for the latest
information about the models in which it can be installed.
Installation procedure overview
o For installation procedures, see the Owner’s Manual for the unit in which you will
install the card.
o Always disconnect the main unit AC cord before installing or removing this card.
o Securely tighten the attachment screws on the right and the left of the card before
use.
Conventions used in this manual
In this manual, we use the following conventions:
o SDHC/SDXC memory cards are referred to as “SD cards”.
o Additional information is introduced in the styles below when needed:
TIP
These are tips about how to use the unit.
NOTE
These provide additional explanations and describe spe cial cases.
ATTENTION
Failure to follow these instructions could result in damage to equipment or lost
data, for example.
V
CAUTION
Failure to follow these instructions could result in injury.
About TASCAM customer support service
TASCAM products are supported and warrantied only in their country/region of
purchase.
To receive support after purchase, on the TASCAM Distributors list page of the TEAC
Global Site (https:// teac-global.com/), search for the local company or representative
for the region where you purchased the product and contact that organization.
When making inquiries, the address (URL) of the shop or web shop where it was
purchased and the purchase date are required.
Moreover, the warranty card and proof of purchase might also be necessary.
6 TASCAM IF-MTR32