MP3 Player User Manual

TASCAM HS-8 41
4 Select the take that you want to erase. Touch the
MULTI SELECT button to enable the selection of
multiple takes.
5 Touch the MENU button to open a pop-up menu.
6 Touch the DELETE button in the pop-up menu.
7 Touch the OK button or press the DATA dial when a
confirmation pop-up message appears.
During erasure, a progress status pop-up appears.
When erasure completes, the pop-up disappears.
Changing the start time of a take
1 Press the PROJECT key to open the PROJECT
screen.
2 Touch the “®” button for the project that contains
the take for which you want to edit the start time
to open the folder selection screen.
3 Touch the “®” button for the folder that contains
the take that you want to edit to open the take
selection screen.
4 Select the take that you want to edit.
5 Touch the “ MENU ” button on the “ PROJECT ” screen to
show the pull-up menu.
6 Touch the “ EDIT TC ” button in the pull-up menu to
open the “ EDIT TAKE T/C ” screen.
7 On the “EDIT TAKE T/C” screen, and use the “FRAME
EDIT” button to set whether or not to input the
frame value.
Frame edit on
Frame edit off
8 Use the number buttons to input the take start
time.
If you begin input without selecting the digit, input
•
will start from the smallest one.
To input a specific digit, touch it and make its
•
background yellow, then use the number buttons or
the DATA dial to enter two digits at a time.
Touch the “
•
CLEAR ” button to erase all entered values.
9 Touch the “ ENTER ” button to confirm the setting.
TIP
This can also be edited using a PS/2 keyboard.
•
Press the PS/2 keyboard ESC key to erase all the values.
•
10 When the confirmation pop-up window appears,
touch the “ OK ” button or press the DATA dial.
Using “@” with take names
Select a take and touch the “ CIRCLE @ TAKE ” button to
add “ @ ” to the take name or remove it if it has been added
previously.
5 – Projects