User Manual

46
TASCAM DR-100MKIII
10 – Using the REMOTE jack
This unit has a REMOTE jack.
Connect a TASCAM RC-3F footswitch or TASCAM RC-10 wired
remote control (both sold separately) here to enable remote
operation of this unit.
Using a remote control (TASCAM
RC-10)
TASCAM RC-10 (sold separately)
Setting up a remote control
1. Select the SYSTEM screen REMOTE item to open the REMOTE
screen. (See “Basic menu operation procedures” on page
10.)
2. Set the TYPE item to RC-10(default).
Function button operations
Function button
F1 F2 F3 F4
INPUT L VOL+ INPUT L VOL- INPUT VOL+ INPUT VOL-
Using the remote control
Press the function (F1–F4) buttons on the wired remote control
to use the operations assigned to them on the REMOTE screen.
Using a footswitch (TASCAM RC-3F)
TASCAM RC-3F (sold separately)
Setting up the footswitch
1. Select the SYSTEM screen REMOTE item to open the REMOTE
screen. (See “Basic menu operation procedures” on page
10.)
2. Set the TYPE item to RC-3F (default: RC-10).
3. Select the MODE item and set the footswitch mode.
Options: PLAY (default), REC1, REC2, MINUTES
MODE
Footswitch
L C R
PLAY
.
7/9
/
REC1
8
0/9
FILE INC
REC2
8
0/9
MARK SET
MINUTES
*
7/9
VSA
ON/OFF
* During playback to move back a 3 seconds.
Using the footswitch
Press the pedals of the footswitch to use the operations
assigned to them by the REMOTE screen MODE item.