User Manual

44
TASCAM DR-100MKIII
8 – Settings and Information
Power-on recording function
When the unit is off (in standby mode), press and hold the REC
[0] button while pressing the power button to turn it on and
start recording immediately.
Otherwise, the unit operates normally after starting up.
Attenuating the output
Restricting the line output level
When the unit's line output is input to a camera, the output level
can be attenuated 30 dB.
1. Select the I/O SETTING screen OUTPUT ATT item to open the
OUTPUT ATT screen. (See “Basic menu operation procedures”
on page 10.)
2. Select the LINE item and set the output level of theLINE
OUT jack.
Options: 0 dB (default), -30 dB
Restricting the headphone output level.
They volume might differ depending on the headphones used.
Make settings suitable for the headphones being used. The
default value (EAR PROTECTION) is low in order to protect
hearing.
1. Select the I/O SETTING screen OUTPUT ATT item to open the
OUTPUT ATT screen. (See “Basic menu operation procedures”
on page 10.)
2. Select the PHONES item and set the output level of the
(headphone) jack.
Options: 0 dB, -10 dB, -16 dB, EAR PROTECTION* (default)
*Output level recommended by the European Union