User Manual

TASCAM DR-100MKIII
35
6 – Working with Files and Folders
3. Selecting the DIVIDE item and pressing the ENTER/MARK
button will open another DIVIDE screen.
4. Set the division point.
Use the wheel and skip between marks to move. You can
also play the file and listen to it when searching for a desired
point.
5. After setting the division point and pressing the ENTER/
MARK button, a confirmation screen opens.
6. Select YES to continue execution or select NO to cancel. Then,
press the ENTER/MARK button.
NOTE
After dividing a file, two new files with "a" and "b" added to
the end of the original file name are created.
Examples:
File name before division
160531_0003.wav
File names after division
160531_0003_a.wav (part before division point)
160531_0003_b.wav (part after division point)
TIP
Add marks at positions where you want to divide a file in
advance to make them easier to find later. (See “Adding
marks” on page 38.)
Dividing files at marks (MARK DIVIDE
function)
Files can be divided at points where marks have been added.
(See “Adding marks” on page 38.)
1. While the Home Screen is open when stopped or paused,
press the Fn button to open the FUNCTION screen.
2. Select the DIVIDE item and press the ENTER/MARK button
to open the DIVIDE screen.
3. Select the MARK DIVIDE item, and press the ENTER/MARK
button to open a confirmation screen.
4. Select YES to continue execution or select NO to cancel. Then,
press the ENTER/MARK button.
NOTE
•
Division is only possible at MARK, LEVEL and TIME marks.
(See “Mark types” on page 38.)
•
A Can't Divide No Mark message will appear if the file has
no marks.
•
After dividing a file, new files with "_01", "_02", " _03" and so
on added to the end of the original file name are created in
order.
Example: file with 2 marks
File name before division
160531_0003.wav
File names after division
160531_0003_01.wav
160531_0003_02.wav
160531_0003_03.wav
•
When used together with the automatic marking function,
long recordings can automatically be divided into files with
individual songs, for example. (See “Adding marks” on page
38.)
CAUTION
Mark division is not possible if there is an interval of two
seconds or less between marks.