User's Manual

TASCAM BD-MP1 11
Names and functions of parts
Front panel
1234 567890
qw
1 button and indicator
Use to turn the unit on and off (put it into standby).
The indicator lights red when the power is off (in standby)
and green when on.
V
CAUTION
Before turning the unit on, lower the volumes of connected
equipment to their minimum levels.
Failure to do so could result in a sudden loud noise that could
harm hearing, for example.
ATTENTION
Do not turn the power on/off when the unit is playing any
media or reading data from an SD card or USB flash drive.
Doing so could make the unit stop operating properly and
cause data on the SD card or USB flash drive to be damaged.
2 Disc tray
Press the OPEN/CLOSE [LOCK] button to open the disc
tray and load/remove a disc. To close the disc tray, press the
OPEN/CLOSE [LOCK] button.
3 OPEN/CLOSE [LOCK](
-
) button
Use to open and close the disc tray usually.
Press while pressing the HIDE MENU [SHIFT] button to
enable the front panel lock function.
Do this again to disable the lock function.
4 Remote control signal receiver
Signals from remote controls are received here. When
operating the remote control, point it toward this receiver.
5 Display
This shows various types of information.
6 HIDE MENU [SHIFT] button
When the HOME screen is open, press this to hide it.
Moreover, this button can be pressed at the same time as
another button to enable the shift mode and use the shift
function of that button (shown as light lettering on a black
background).
7 STOP [ENTER] (HOME) (
8
) button
When a video file is being played, paused or searched, press
to stop that operation and return to the HOME screen.
When an audio file is being played, paused or searched, press
to stop playback or searching.
When the HOME screen or Default Settings Screen is open,
press at the same time as the HIDE MENU [SHIFT] button to
enable shift mode and use this as the ENTER button.
8 PLAY [
j
] (
y
) button/indicator
Press when stopped or in playback standby to start playback.
The indicator lights green during playback and is unlit at all
other times.
When the HOME screen or Default Settings Screen is open,
press at the same time as the HIDE MENU [SHIFT] button to
enable shift mode and use this as the move cursor down (
j
)
button.
9 PAUSE [
k
] (
9
) (TOP MENU) button
Press when playing back to pause playback.
When the HOME screen or Default Settings Screen is open,
press at the same time as the HIDE MENU [SHIFT] button to
enable shift mode and use this as the move cursor up (
k
)
button.
0 SKIP
.
/
/
[
l
]/[
;
] (
m
/
,
) (REPEAT/A-B)
buttons
Press when playing back or paused to skip to the previous or
next chapter or file.
(Playback will start after skipping.)
Press and hold when playing back or paused to search
backward/forward. The search speed changes (among 5
speeds) each time the button is pressed and held.
(To resume playing back or to pause when searching
backward/forward, press the PLAY [j] (y) or PAUSE [k]
(9) button.
When the HOME screen or Default Settings Screen is open,
press at the same time as the HIDE MENU [SHIFT] button to
enable shift mode and use as the move cursor left/right (
l
/
;
)
buttons.
q USB port
Connect/disconnect USB flash drives here.
Audio, video and other files can be played back from a
connected USB flash drive. Moreover, this can be used to load
update files for firmware updates.
w SD card slot
Insert an SD card in this slot.
Audio, video and other files can be played back from a
connected SD card.