User's Guide

Tarvos User Guide - Version 0.3 52
modem.protocol.ps111.control.duty_cycle_period
Read Permission
admin
Write Permission
admin
Default
0
Priority
5
(Integer) If 0, duty cycle is disabled. If non-zero, use this period (in ms)
when PS111 is enabled. From 0 to 10000.
This is implemented with an LLRP ROSpecStartTrigger thats periodic.
With an offset and period equal to this variable. The reader will
scans all the ports for PS111 at a period equal to this variable.
modem.protocol.passive.control.duty_cycle_period
Read Permission
admin
Write Permission
admin
Default
0
Priority
5
(Integer) If 0, duty cycle is disabled. If non-zero, use this period for all
passive protocols. From 0 to 10000.
This is implemented with an LLRP ROSpecStartTrigger thats periodic.
With an offset
and period equal to this variable. The reader will scans all the
ports for passive protocols at a period equal to this variable.
modem.protocol.isoc.control.use_block_write
Read Permission
admin
Write Permission
admin
Default
false
Priority
5
(Boolean) Use block write capability.
Corresponds to using the C1G2BlockWrite OpSpec when writing to tags
(if supported by the tag).
modem.protocol.isoc.control.auto_mac.enable
Read Permission
admin
Write Permission
admin
Default
true
Priority
5
(Boolean) Enable or disable auto mac layer.
It is recommended that this value remains 'true' unless directed to
change it.
modem.protocol.isoc.control.number_slots_q
Read Permission
admin
Write Permission
admin
Default
4
Priority
5
(Integer) Initial number slots to set q to.