User's Guide

Tarvos User Guide - Version 0.3 50
modem.protocol.isoc.filter.f.offset
Read Permission
admin
Write Permission
admin
Default
0
Priority
5
(Integer) Bit offset for the ISOC mask filter.
Corresponds to LLRP's C1G2TagInventoryMask Parameters 'Pointer' value.
modem.protocol.isoc.filter.f.session
Read Permission
admin
Write Permission
admin
Default
NOT_USED
Priority
5
(Enum) ISOC session to use for tag communication when using the filters.
Possible values: 'S0', 'S1', 'S2', 'S3', 'SL', 'not_used'
Corresponds to LLRP's C1G2TagInventoryStateAwareFilterAction Parameters
'Target' value
'SL' is used by default if this filter is enabled and all session
variables point to a 'not_used' value.
modem.protocol.isoc.filtering.enabled
Read Permission
admin
Write Permission
admin
Default
false
Priority
3
(Boolean) Enables all ISOC mask filters.
This enables (or disables) all of the modem.protocol.isoc.filter.f
mechanisms.
modem.protocol.isoc.filtering.use_session
Read Permission
admin
Write Permission
admin
Default
false
Priority
5
(Boolean) Target the tag session inventoried flag for ISOC filter.
If 'true', use the modem.protocol.isoc.control.session_id in the
filters.
If 'false', use the value in each filter variable (use 'SL' if not
otherwise configured) Corresponds to LLRP's
C1G2TagInventoryStateAwareFilterAction Parameters 'Target' value
modem.protocol.p.physical.sensitivity
Read Permission
admin
Write Permission
none
Default
Priority
5
(Integer) Set protocol sensitivity .
(only supported for ISOC and ISO10374 protocols)
'p' is one of the readers valid protocols (see setup.valid_protocols)