User Manual

7
96°
165 mm
（155 mm）
240 mm
180°
（3）Gimbal Mounting
Mount the gimbal onto the landing gear. With some thread locker,
tighten the mount screws.
TIPs：
①Please DO NOT remove any screw in the gimbal during mounting.
②We have correctly adjusted the center of gravity of the gimbal. Please
DO NOT change it based on your preference.
③The controller module with pin-port side should face to the head of the
multi-rotor.
④When mounting the gimbal and landing gear, please ensure all the dampen
components are paralleled and undamaged.
⑤Please make sure all the wirings are correct.
ASSEMBLY SECTION
5