Technical Specifications

FiberFloor™ Harrison™
Product Specifications
Tarkett North America
Technical Services Department
30000 Aurora Road
Solon, Ohio 44139
888-639-8275 Fax [phone]
[e-mail]
www.tarkettna.com © 2019 Tarkett USA Inc. 07.19.19
1. PROPRIETARY PRODUCT
Fiberglass reinforced for stability and a polyurethane
reinforced finish makes this product durable and easy to
maintain.
Recommended areas for use: Residential
2. PRODUCT DETAILS
 Construction: Urethane Topcoat Sealed (Low Gloss)
 Series: 15000
 Overall thickness: .053” (1.4 mm)
 Wear Layer Thickness: .010” (0.25 mm)
 Widths: 12’ (3.6m)
 Maximum Roll Size: 88 SY (73 m
2
)
 Weight per Square Yard: 2.22 (1 kg)
3. PRODUCT PERFORMANCE AND TECHNICAL DATA
3.1. Flooring Radiant Panel: ASTM E 648, >0.45 W/cm²
3.2. Smoke: ASTM E662, <450
3.3. HUD/FHA Minimum Property Standards: Meets
Wearlayer Thickness
3.4. FloorScore® Certification SCS-EC10.3-2014: SCS-FS-
02746
3.5. Asthma and Allergy Certified: ASR-1155-03
4. ADHESIVE
Tarkett QBond-One Adhesive
Releasable - Medium Nap Roller
Permanent - 1/32” x 1/16” x 1/32” trowel
Tarkett 959 Vinyl Tile and Plank Adhesive
Permanent - Porous: 1/16” x 1/16” x 1/16” V-notch
Non-porous: 1/32” x 1/16” x 1/32” U-notch
Porous/Non-porous: Medium Nap Roller
Follow Instructions on the Adhesive Label.
5. INSTALLATION – Refer to Detailed Instructions at
www.tarkettna.cm
 Installation System: Floating or Full Spread.
 Maintain the work area, flooring and adhesive between
55° F and 95° F (12.8°C - 35°C) for 48 hours before,
during and after installation. Maintain relative humidity
between 40% and 70%.
 Installations subjected to heavy traffic, caster action or
requiring net fit must be fully adhered using Tarkett
QBond-One or 959 Vinyl Tile and Plank Adhesive.
 Seal and protect seams from all traffic for a minimum
of 3 hours.
6. SEAM METHOD
Glueless-Double-cut dry, use Tarkett S875 Floating Seam
Tape under seams on all approved substrates & Tarkett
S860 Seam Tape over concrete only.
Full Spread (Releasable) - Double-cut. No tape required.
Full Spread (Permanent) - Double-cut dry. Use Tarkett S860
Seam Tape.
7. SEAM SEALER: Tarkett DT-65 (Low Gloss)
8. WARRANTY – For complete details, contact Tarkett
Technical Services or go to www.tarkettna.com
 7 YEAR LIMITED RESIDENTIAL WARRANTY
9. CARE AND MAINTENANCE
 When fully adhering, do not replace frequently moved
furniture or allow heavy traffic for at least 24 hours.
 Never slide heavy furniture or appliances across the
floor. Place sheets of plywood over floor when moving
furniture and appliances into position.
 Maintain post installation temp. between 55º F and 95º
F (12.8°C - 35°C). Maintain relative humidity between
40% and 70%.
 Use non staining mats or area rugs at doorways and
entranceways to collect excess water, sand, grit and
debris. Clean the mats and area rugs on a regular basis.
 Use smooth, hard plastic or metal furniture rests or
glides under frequently moved furniture to avoid
scratches and indentations. Do not use felt pads.
 Wash floor with Tarkett SureShine® Floor Cleaner or
equal neutral floor cleaner.
7. TECHNICAL SERVICES
For current Installation and Maintenance Instructions,
Product Specifications, and other technical data, visit
www.tarkettna.com or contact Tarkett at (888)-639-8275.