Installation Guide

ID_20160516_EN_HOMOGENEOUS_SHEET
Tarkett North America
Technical Services Department
30000 Aurora Road
Solon, OH 44139
800.899.8916 Ext. 9297 Fax [phone]
[e-mail]
www.tarkettna.com
© 2019 Tarkett USA Inc. 01/2019
MAINTENANCE
1. Wait 72 hours after installation before
performing initial cleaning.
2. A regular maintenance program must be
started after the initial cleaning.
3. Refer to Tarkett’s Maintenance
Instructions for complete details.
ADHESIVE SELECTION CHART
Application and Coverage
Moisture / pH Limits
Notes
Products
Adhesive
Porous
Non-Porous
RH%
CaCl
2
pH
Vinyl Composition Tile
100 Clear Thin
Spread Adhesive
1/32 x 1/16 x 1/32 U
250 – 300 sq. ft.
per gallon
1/32 x 1/16 x 1/32 U
250 – 300 sq. ft.
per gallon
90%
8 lbs.
10
The 100 adhesive is sensitive to
substrate porosity. Determine
substrate porosity and follow the
adhesive label instructions
regarding porous and non-
porous substrate drying times
prior to the installation.
Vinyl Composition Tile
975 Two-Part
Urethane Adhesive
1/32 x 1/16 x 1/32 U
225 – 250 sq. ft.
per gallon
1/32 x 1/16 x 1/32 U
225 – 250 sq. ft.
per gallon
85%
7 lbs.
9
For application in areas subject
to heavy point loads, rolling
loads, topical moisture, or
temperature extremes such as
adjacent to grocery store
freezers & refrigerators.
Vinyl Composition Tile
901 SpraySmart
Resilient Flooring
Adhesive
200 sq. ft. per can
1200 sq. ft. per carton
200 sq. ft. per can
1200 sq. ft. per carton
90%
8 lbs.
10
The SpraySmart Adhesive
System is unique; instructions
on can must be followed.
Contact Tarkett Technical
Department prior to use for
training.