Installation Guide

FINISHING
• Do not allow foot traffic for at least 24 hours after installation.
• Do not allow rolling loads for at least 72 hours after installation.
• Use plywood to cover the top of the flooring when moving heavy furniture or appliances into position.
• Use proper floor protectors under the legs of furniture.
• Maintain post installation temperature between 55º F and 100º F. Maintain relative humidity between 40% and 70%.
CARE AND MAINTENANCE
• Do not wash floor for at least 72 hours after installation.
• Remove any dried adhesive with a clean, white cloth dampened with mineral spirits (use caution when handling flammable
solvents).
• Place walk off mats at all entryways. This will help dirt from being tracked onto the floor and extend the life of the floor.
• Sweep or vacuum floor to remove to remove any loose dirt and debris.
• Damp mop floor with a neutral floor cleaner. For commercial applications, a 175 rpm rotary scrubbing machine equipped
with a blue scrubbing pad is acceptable.
• Thoroughly rinse floor with clean water and allow to dry.
• Apply 3-5 coats of a good quality floor finish. Apply and maintain floor finish according to manufacturer’s recommendations.