SDS
Date of issue/Date of revision
: 2015-10-14. Date of previous issue
: 2015-10-07.
Version : 1.07
2/12
826-12
0000109118
Section 2. Hazards identification
Prevention
:
Wear protective gloves. Wear eye or face protection. Keep away from heat, sparks,
open flames and hot surfaces. - No smoking. Use explosion-proof electrical, ventilating,
lighting and all material-handling equipment. Use only non-sparking tools. Take
precautionary measures against static discharge. Keep container tightly closed. Use
only outdoors or in a well-ventilated area. Avoid release to the environment. Avoid
breathing vapor. Wash hands thoroughly after handling.
Response
:
IF INHALED: Remove person to fresh air and keep comfortable for breathing. Call a
POISON CENTER or physician if you feel unwell. IF SWALLOWED: Call a POISON
CENTER or physician if you feel unwell. IF ON SKIN (or hair): Take off immediately all
contaminated clothing. Rinse skin with water or shower. IF ON SKIN: Call a POISON
CENTER or physician if you feel unwell. IF IN EYES: Rinse cautiously with water for
several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. If
eye irritation persists: Get medical attention.
Storage
:
Keep cool.
Disposal
:
Dispose of contents and container in accordance with all local, regional, national and
international regulations.
Hazards not otherwise
classified
:
None known.
NOTICE: Reports have associated repeated and prolonged OVEREXPOSURE to solvents with permanent brain and
nervous system damage. Intentional misuse by deliberately concentrating and inhaling the contents of this package may
be harmful or fatal.
Substance/mixture :
Mixture
Other means of
identification
:
Not available.
CAS number/other identifiers
CAS number :
Not applicable.
Product code
:
826-12
Ingredient name
%
CAS number
cyclohexanone
35 - 45
108-94-1
tetrahydrofuran
35 - 45
109-99-9
amorphous silica
1 - 5
112926-00-8
aromatic solvent
1 - 5
.........
dibutyltin dilaurate
0.1 - 1
77-58-7
Any concentration shown as a range is to protect confidentiality or is due to batch variation.
There are no additional ingredients present which, within the current knowledge of the supplier and in the
concentrations applicable, are classified as hazardous to health or the environment and hence require reporting
in this section.
Occupational exposure limits, if available, are listed in Section 8.
Description of necessary first aid measures
Eye contact :
Immediately flush eyes with plenty of water, occasionally lifting the upper and lower
eyelids. Check for and remove any contact lenses. Continue to rinse for at least 10
minutes. Get medical attention.
Inhalation :
Remove victim to fresh air and keep at rest in a position comfortable for breathing. If it
is suspected that fumes are still present, the rescuer should wear an appropriate mask
or self-contained breathing apparatus. If not breathing, if breathing is irregular or if
respiratory arrest occurs, provide artificial respiration or oxygen by trained personnel. It
may be dangerous to the person providing aid to give mouth-to-mouth resuscitation.
Get medical attention. If necessary, call a poison center or physician. If unconscious,
place in recovery position and get medical attention immediately. Maintain an open
airway. Loosen tight clothing such as a collar, tie, belt or waistband. In case of
inhalation of decomposition products in a fire, symptoms may be delayed. The exposed
Section 4. First aid measures
Section 3. Composition/information on ingredients