Wireless Keypad and Optical Mouse Combo USER GUIDE
TARGUS WIRELESS KEYPAD AND OPTICAL MOUSE COMBO Introduction Congratulations on your purchase of the Targus wireless keypad and opitcal mouse combo. This combo set offers the latest technology for interference free operation with 2.4 GHz wireless connection. Both keypad and mouse feature on/off switch and power saving management for effective power conservation.
Targus wireless keypad and opitcal mouse combo Operating System • Windows® 2000/XP • Windows Vista™ Installing the Batteries Optical Mouse Removing the battery cover 1 Insert the supplied batteries , making sure that the positive (+) and negative (-) ends of each battery match the polarity indicators inside the battery housing. WARNINGS: WHEN REPLACING THE BATTERIES, YOU MAY USE ALKALINE OR OTHER HEAVY-DUTY NIMH BATTERIES. NEVER COMBINE AN ALKALINE WITH A NIMH BATTERY IN A DEVICE.
Targus wireless keypad and opitcal mouse combo Wireless Keypad 1 Remove the battery cover located on the bottom of the keypad. 2 Insert the supplied batteries , making sure that the positive (+) and negative (-) ends of each battery match the polarity indicators inside the battery housing. 3 Turn on the keypad by sliding the Power switch on the back side of the keypad to the “on” position. Setup Key Power Switch Connecting the Receiver Plug the USB receiver into an available USB port on your computer.
Targus wireless keypad and opitcal mouse combo Setting the Identification Code After your computer detects the USB receiver you must set the ID code between the receiver and the mouse as well as between the receiver and the keypad BEFORE you can use them. To do this, do the following: NOTE: MAKE SURE THAT YOUR COMPUTER IS TURNED ON AND HAS DETECTED THE USB RECEIVER BEFORE YOU SET THE ID CODE. Optical Mouse 1 Plug the USB receiver into an available USB port on your computer.
Targus wireless keypad and opitcal mouse combo Wireless Keypad 1 The LED on the receiver will flash for 60 seconds to indicate ID search mode. During this time, press and release the connection button on the back of the keypad. 2 When the light emitter diode (LED) on the receiver is lit, the keypad is set up with an ID and the receiver is locked. You are now ready to use the keypad.
Targus wireless keypad and opitcal mouse combo Using the Keypad Definition of the Keypad Keys: .
Targus wireless keypad and opitcal mouse combo 7 Home 8 9 PgUp + = NumLock on - enters “7” on the display NumLock off - emulates the Home key NumLock on - enters “8” on the display NumLock off - moves the cursor up one line of text NumLock on - enters “9” on the display NumLock off - emulates the Page Up key NumLock on NumLock off NOTE: THE NUMLOCK KEY ON YOUR COMPUTER WILL NOT AFFECT THE NUMLOCK STATUS OF THE KEYPAD.
Targus wireless keypad and opitcal mouse combo Using the multimedia/internet controls To switch between the two modes, press the Mode key.
Targus wireless keypad and opitcal mouse combo Power Management To power the keypad and mouse on and off, slide the on/off switch to the desired position. When power is on, the mouse goes into “power saving mode” after 4 minutes of inactivity. To activate the mouse, move the mouse or press any button. To save battery power, turn off the keypad and mouse while traveling or when you’re not using them.
Targus wireless keypad and opitcal mouse combo • If your computer has a metal case that contains aluminum or magnesium, use the optical mouse to the side. The display panel may interfere with the radio frequency signal if you use the mouse directly in front of the computer. • Never use the optical mouse on a glass or mirrored surface as these surfaces will cause the mouse to fail temporarily. • To maximize battery life, use the optical mouse on a white, or light colored surface.
Targus wireless keypad and opitcal mouse combo When I use the mouse, other wireless devices work more slowly or fail temporarily – what should I do? • The mouse may cause interference with any cordless, radiobased device that operates at 2.4 GHz, such as a telephone, baby monitor, or toy. To reduce interference, move the mouse’s receiver and the base unit of the affected device as far away from each other as possible. • You can also reset the mouse’s identification code.
Targus wireless keypad and opitcal mouse combo Specifications Operation Frequency 2.4 GHz Operating Distance Up to 10m Operating Voltage Keypad: 2.4V Receiver: 5V Mouse: 3V Keypad: 10mA maximum Receiver: 16mA maximum Mouse: 11mA maximum Keypad: Below 300 uA Mouse: Below 1 mA Keypad: 155 x 92 x 27 mm Receiver: 58 x 16 x 10 mm Mouse: 98 x 60 x 33.
Targus wireless keypad and opitcal mouse combo Technical Support For technical questions, please visit: US Australia New Zealand Internet: www.targus.com/support.asp Internet: www.targus.com/au Email: infoaust@targus.com Telephone: 1800-641-645 Telephone: 0800-633-222 Product Registration Targus recommends that you register your Targus accessory shortly after purchasing it. Go to: http://www.targus.com/registration.asp.
Targus wireless keypad and opitcal mouse combo FCC Statement Tested to Comply This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Visit our website at www.targus.com Features and specifications are subject to change without notice. © 2008 Targus Group International, Inc. and Targus, Inc.
