User guide

Targus USB 2.0 CD-ROM Slim External Drive

1 Turn on your computer and press the drive’s eject button to open the

tray.

2 To insert a disc, hold it by the edges and place it in the tray with the

readable (plain) side down.

3 Close the media tray by gently pushing it until it clicks into place.

To remove a disc, grasp it by the edges and gently pull up until the disc

is released.

Removing a Disc Using the Emergency Eject Feature

CAUTION: Use the emergency eject mechanism only if the Targus drive is not connected

to your computer or if the computer’s battery is flat and there is no power available for

the eject button. Excessive use of the emergency eject mechanism may damage it and

cause the mechanism to stop working.

To manually remove a disc when there is no power to your computer:

1 Gently insert a slim, straight object, such as a straightened paper

clip, into the emergency eject hole until you feel some resistance.

2 Remove the paper clip.

3 Carefully open the tray by hand.

Targus drive

Emergency

eject hole

Media tray

Eject button

Indicator light

USB 2.0 cable port

AC adapter jack

Lock slot for use with

Targus locks - Models

nos. PA410 or

PA450 (not included)

Cable Lock

Slot