User guide

TARGUS USB 2.0 CD-ROM

SLIM EXTERNAL DRIVE

Introduction

Thank you for purchasing the Targus USB 2.0 CD-ROM Slim External

Drive that allows you to read audio and data CDs. After installing the

Targus drive, you can use it at any time by connecting the supplied

Universal Serial Bus (USB) Y-cable to your computer’s USB ports.

This user’s guide describes how to connect and operate the Targus

drive. In addition to this user’s guide, this package contains:

• Targus USB 2.0 CD-ROM Slim External Drive

• USB Y-cable

System Requirements

To use the Targus drive, your computer must meet the following

hardware requirements and run one of the operating systems listed

below.

Hardware

• PC with an Intel® Pentium® processor or equivalent and a hard

disk drive

• 64 MB RAM or higher, depending on the operating system

• Two (2) USB 1.1 or 2.0 interface ports

NOTES: When connected to USB version 1.1 ports, the drive’s performance level will

be less than optimal. For best results, connect the driver to USB version 2.0 ports.