Optical Bluetooth® Mouse USER GUIDE Visit our Website at www.targus.com Features and specifications subject to change without notice. © 2007 Targus Group International, Inc. and Targus, Inc.
TARGUS OPTICAL BLUETOOTH® MOUSE Introduction Congratulations on your purchase of the Targus Optical Bluetooth Mouse. This mouse uses Bluetooth wireless technology which provides seamless connections up to 30ft (10M) in range. System Requirements Hardware • Bluetooth-enabled notebook or desktop PC Operating System • Windows® 2000 / XP • Windows VistaTM • Mac OS X 10.2.
Targus Optical Bluetooth Mouse Installing the Batteries (Included) • Use the two AAA-size rechargeable NIMH batteries (Included) • Remove the battery cover from the top of the mouse by sliding off the cover of the mouse. • Insert the batteries, making sure that the positive (+) and negative (-) ends of each battery match the polarity indicators inside the battery housing WARNINGS: WHEN REPLACING THE BATTERIES, ALWAYS REPLACE WITH NiMH BATTERIES OR OTHER RECHARGEABLE BATTERIES.
Targus Optical Bluetooth Mouse Mouse Power Management • To power the mouse on and off, slide the on/off switch at the bottom of the mouse to the desired position. • During operation, the power saving feature puts the mouse into "sleep mode" after 8 minutes of inactivity. Click any mouse button to re-activate the mouse. • To save battery power, turn off the mouse while traveling or while not in use. • The scroll wheel will glow when the batteries are low.
Targus Optical Bluetooth Mouse 1. Charge the mouse for at least 8 hours before using it. And please make sure only rechargeable batteries (included) are used. 2. Your computer needs to stay powered on for the mouse to charge.
Targus Optical Bluetooth Mouse Establishing a Communications Link Initial Configuration Before you can begin using Bluetooth connectivity on your computer and other Bluetooth devices, you must set up your Bluetooth connection correctly. Please make sure this is performed before establishing the connection with the Bluetooth device. The Targus Optical Bluetooth Mouse is designed to work with the four major software stack (protocol) standards: WIDCOMM, Toshiba and Microsoft and Mac OS X.
Targus Optical Bluetooth Mouse 2. The Bluetooth Wizard screen will prompt. Please follow the onscreen instructions. (Windows Vista) (Windows XP) 3. Please turn on the mouse and press the connection ID button located at the bottom of the mouse until the LED on the mouse blinks red (discovery mode). Click Next to continue pairing and the computer will search for the mouse.
Targus Optical Bluetooth Mouse 4. The confirmation window will appear after the computer finishes detecting the Bluetooth devices. Select the Bluetooth Wireless Mouse and click Next to continue. (There may be one or more different Bluetooth devices detected.) If the mouse is not detected, please make sure the power is on and in discovery mode. Press Search Again to re-pair the device. (Windows Vista) (Windows XP) 5. After selecting the correct device, the computer will finish establishing the connection.
Targus Optical Bluetooth Mouse Connecting with Bluetooth Software: TOSHIBA (Windows Vista) 1. Double click on the Bluetooth Manager icon in the system tray, and then click Add New Connection. 2. Please turn on the mouse and press the connection ID button located at the bottom of the mouse until the LED on the mouse blinks red (discovery mode). Click Next to continue pairing and the computer will search for the mouse.
Targus Optical Bluetooth Mouse 3. The computer will now search for the Bluetooth mouse and other Bluetooth devices. Please wait until the search is completed. Choose the device you wish to connect. There may be more than one Bluetooth device detected. Select Bluetooth Wireless Mouse and click Next to continue. If the mouse is not detected, please make sure the mouse is in discovery mode and click Refresh. 4. The computer will begin connecting with the device.
Targus Optical Bluetooth Mouse 5. The connection is established and setup is complete. The device is ready to use. If the connection is not successful, please click Back and search the device again. You can continue to add other Bluetooth devices or close the window.
Targus Optical Bluetooth Mouse Bluetooth Software: Mac 1. Go to the Bluetooth icon located on your desktop or in the system bar and click the icon to begin setup. Select “Turn Bluetooth On” to enable the device. 2. Scroll down the list to “Set up Bluetooth Device...” and select the option. 3. Bluetooth Setup Assistant will begin. Please follow the on-screen instructions.
Targus Optical Bluetooth Mouse 4. Please select “mouse” and click continue to proceed with setup. Please make sure your mouse is in “discovery” mode. To enable “discovery” mode, turn on the mouse and press the connection ID button located at the bottom of the device until the light in the middle blinks red light. 5. Your computer will begin to search for the mouse. Once the mouse is found, it will show up in the list.
Targus Optical Bluetooth Mouse 6. The Bluetooth mouse will now begin pairing. Click continue to proceed. 7. Congratulations. Your Bluetooth mouse is setup and is ready to use. You can choose to setup another device or click Quit to exit setup.
Targus Optical Bluetooth Mouse Troubleshooting What do I do if the device does not work? • Make sure that the polarity of the battery is correct. The positive (+) and negative (-) ends must match the positive (+) and negative (-) connections in the battery housing. • Make sure you have established a communications link. See “Establishing a Communications Link.
Targus Optical Bluetooth Mouse Technical Support For technical questions, please visit: US Australia New Zealand Internet: www.targus.com/support.asp Internet: www.targus.com/au Email: infoaust@targus.com Telephone: 1800-641-645 Telephone: 0800-633-222 Product Registration Targus recommends that you register your Targus accessory shortly after purchasing it. Go to: http://www.targus.com/registration.asp. You will need to provide your full name, email address, country of residence and product information.
Targus Optical Bluetooth Mouse FCC Statement Tested to Comply This equipment has been tested and found to comply with the limits of a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
